Product Data Sheet Show all documents
EVERBUILD® Ultra Hard Floor Varnish

EVERBUILD® Ultra Hard Floor Varnish

CLEAR QUICK DRYING FLOOR VARNISH FOR A 'HAMMER HARD' TOUGH FINISH

EVERBUILD® Ultra Hard Floor Varnish is a clear quick drying varnish ideal for use on most common types of wooden floors including hardwood, softwood, hardboard, chipboard and composite wooden boards. EVERBUILD® Ultra Hard Floor Varnish has been specifically developed to provide an ultra-hard scratch resistant natural finish to most interior wooden floors.  EVERBUILD® Ultra Hard Floor Varnish provides superior protection for wooden floors and has a hammer hard, tough finish to protect wood against scratches and spills. EVERBUILD® Ultra Hard Floor Varnish is touch dry in 30 mins.  

  • Superior protection for wooden floors.
  • Low solvent formula
  • Touch dry in 30 minutes.
  • Enhances and protects wood against scratches and spills.
  • Clear finish, no discoloration.
  • Withstands heavy foot traffic.
Product Data Sheet Show all documents

Usage

Suitable for use in kitchens, bathrooms, lounge, dining areas or where heavy foot traffic would be expected.

Advantages

  • Superior protection for wooden floors.
  • Low solvent formula
  • Touch dry in 30 minutes.
  • Enhances and protects wood against scratches and spills.
  • Clear finish, no discoloration.
  • Withstands heavy foot traffic.

Packaging

750ml & 2.5ltr tins

Colour

White liquid, dries clear

Product Details

Product Information

Shelf Life

2 years from date of manufacture when stored as directed.

Storage Conditions

Store in cool dry conditions between + 5 and +25°C.  Storage outside these conditions will dramatically reduce shelf life. PROTECT FROM FROST.

Density

~1.0 g/cm³

Viscosity

Dynamic viscosity 500-1000cPs @ 20°C

Application

Application Information

Curing Time

Can be walked on after approximately 8 hours depending on ambient temperature and conditions.  Allow 72 hours before subjecting to heavy foot traffic. Do not cover with carpets or rugs for at least 7 days.  Protect from water for 5 days.

 
Consumption

Consumption

Up to 16 square metres per litre. Coverage will vary depending on the absorbency of the wood.
Application steps

APPLICATION

Stir product well before use and periodically during application.  Brush apply EVERBUILD® Ultra Hard Floor Varnish following the direction of the wood grain.  Apply a minimum of 3 coats allowing 1 hour between coats. Lightly sand the surface before applying the final coat. Always apply the varnish to a wet edge working systematically across the surface keeping the wet edge together as much as possible to avoid overlap.

CLEANING OF TOOLS

Clean brushes thoroughly after use with warm soapy water.

Documents