Product Data Sheet Show all documents
EVERBUILD® Lumberjack® Woodworm Killer

EVERBUILD® Lumberjack® Woodworm Killer

Ready to use woodworm treatment

EVERBUILD® Lumberjack® Woodworm Killer is a ready to use treatment for the eradication of all types and life stages of wood boring insects and their larvae, specifically woodworm. The added insecticide also aids to actively kill the woodworm and protect against re-infestation. Micro fine actives penetrate deep into the wood.

  • Kills all types of wood boring insects
  • Penetrates deep into the wood for long lasting protection
  • Overpaintable
  • Ready to use, no need to dilute
  • Fast drying
Product Data Sheet Show all documents

Usage

  • Can be used on most internal furniture, woodwork and joinery such as doors, window frames, roof timbers, floorboards, joists, rafters, etc. It can be over painted, stained, varnished, or polished when dry if required
  • For interior use only
 

Advantages

  • Kills all types of wood boring insects
  • Penetrates deep into the wood for long lasting protection
  • Overpaintable
  • Ready to use, no need to dilute
  • Fast drying

Packaging

5ltr tin

Colour

Clear

Product Details

Product Information

Shelf Life

Use within 2 years of manufacture.

Storage Conditions

Store between 5 and 25°C in original containers away from children.

Density

ca. 1 g/cm³

Application

Consumption

Consumption

  • Apply 2 coats at a rate of 1 litre of product per 3 - 4m² of surface.
  • Dip end grains for a minimum of 3 minutes or flood thoroughly where dipping is not possible.
  • Drying time is approximately 1 hour depending on temperature.
 
Application steps

APPLICATION

Read statutory conditions relating to use prior to application. Shake well before use. Apply by brush, spray or dipping. Apply a minimum of two coats if brushing or spraying. The second coat should be applied after the first coat has soaked in but before it is dry. Pay particular attention to thoroughly soaking the end grain. Where possible, dip or flood the end grains of the timber for maximum protection. NOTE: product is milky out of the can drying clear.

CLEANING OF TOOLS

Remove as much product as possible from brush or spray then clean with soapy water.

Documents