Product Data Sheet Show all documents
EVERBUILD® Shed & Fence Mate

EVERBUILD® Shed & Fence Mate

Water based shed and fence treatment 

EVERBUILD® Shed & Fence Mate is an easy to use, water based shed and fence treatment specifically designed to provide a safe alternative to creosote without the associated hazards. The product provides a durable water repellent finish to all rough sawn timber. EVERBUILD® Shed & Fence Mate contains carefully selected UV resistant pigments and water repellent waxes that makes the colour last up to six times longer than creosote. It is designed for use on all rough sawn garden timber including sheds, fences, gates, hutches, kennels, cold frames and trellises.

  • Water based formulation - non-flammable, low odour.
  • Easy to use – water clean up of spills and tools.
  • Water repellent – special waxes shed water for increased durability.
  • Long lasting finish.
  • Will cover existing creosote providing it has weathered, i.e. it isn't water repellent.
MFFT 5oC Drying Time 2-6 Hours
Product Data Sheet Show all documents

Usage

Decorating and protecting all rough sawn timber.  

Advantages

  • Water based formulation - non-flammable, low odour.
  • Easy to use – water clean up of spills and tools.
  • Water repellent – special waxes shed water for increased durability.
  • Long lasting finish.
  • Will cover existing creosote providing it has weathered, i.e. it isn't water repellent.
MFFT 5oC Drying Time 2-6 Hours

Packaging

5L Plastic Bucket

Colour

Coloured solution (water based)

Country Oak, Burnt Oak, Rustic Red, Holly Green, Ebony Black.

Product Details

Product Information

Shelf Life

24 months from date of manufacture when stored according to manufacturer’s instructions.

Storage Conditions

Store at moderate temperatures, 5 - 30°C, in original containers. PROTECT FROM FROST.

Density

~1.0 g/cm³

Application

Consumption

Yield

1 litre will cover approximately 6-12m² per coat depending on nature of surface.

 
Application steps

APPLICATION

Always stir well before use. Brush uniformly onto surface ensuring an even coverage. One coat is normally sufficient, but on some very porous or bare timbers, two or three coats may be required to achieve the correct depth of colour. Allow the first coat to dry before applying the second.

Drying time will be 2-6 hours depending on temperature. Do not apply below 5oC.

CLEANING OF TOOLS

Clean brushes, spillages etc in warm soapy water.

Documents