Product Data Sheet Show all documents
EVERBUILD® DEEP GAP FILLER

EVERBUILD® DEEP GAP FILLER

Fills deep holes in one application

EVERBUILD® DEEP GAP FILLER is a revolutionary new filler, formulated using ceramic spheres that fill most holes and cracks; especially deep holes, in just one quick application with no need for secondary filling to level off. EVERBUILD® DEEP GAP FILLER will not shrink, sag or crack and dries to a light grey finish.
EVERBUILD® DEEP GAP FILLER finishes smooth, requiring little or no sanding and can be ready to paint or wallpaper in just 30 minutes. It can be used for repairs to wood, plaster, masonry, cement, stone, brick and rendering.

  • Fills in one go- No need to build up layers of filler - fills up to 50mm deep in one application
  • Easy to use - lightweight paste is incredibly easy to apply
  • No sanding required - finishes to a smooth surface
  • No sagging - the lightweight properties of DEEP GAP FILLER prevent sagging even on ceilings.
  • Non-shrink - will not shrink back whilst drying
  • Quick drying - ready to paint/paper in just 30 minutes (subject to ambient temperature/conditions)
  • Overpaintable with most solvent based and emulsion paints
  • Overstainable
Movement Accomodation Low/Moderate Maximum Width 50mm pH8.3 - 9.9Viscosity60,000-150,000 cP @ 20°C 50% R.H
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

Fills gaps and holes in
  • Plaster
  • Brick
  • Stone
  • Wood
  • Render
  • Cement
  • Masonry
Internal use only.  

Advantages

  • Fills in one go- No need to build up layers of filler - fills up to 50mm deep in one application
  • Easy to use - lightweight paste is incredibly easy to apply
  • No sanding required - finishes to a smooth surface
  • No sagging - the lightweight properties of DEEP GAP FILLER prevent sagging even on ceilings.
  • Non-shrink - will not shrink back whilst drying
  • Quick drying - ready to paint/paper in just 30 minutes (subject to ambient temperature/conditions)
  • Overpaintable with most solvent based and emulsion paints
  • Overstainable
Movement Accomodation Low/Moderate Maximum Width 50mm pH8.3 - 9.9Viscosity60,000-150,000 cP @ 20°C 50% R.H

Packaging

1ltr tub

Colour

Lightweight light grey paste

Product Details

Product Information

Shelf Life

24 months from date of manufacture when stored according to manufacturers instructions.

Storage Conditions

Store at moderate (5-30°C) temperatures.

Density

1.15-1.25g/cm³

Application

Application Information

Layer Thickness

50mm in one coat – further layers may be built up

Ambient Air Temperature

5°C to 30°C

Drying time

30 minutes at 20°C 50% R.H.
Application steps

APPLICATION

Stir EVERBUILD® DEEP GAP FILLER to a smooth paste. If product is too dry, add a few drops of water and re-stir. Apply using a flexible filler knife, smoothing down to achieve a perfect surface that won’t need sanding.
When filling a large surface area, it may not always be possible to achieve a completely level finish. However, EVERBUILD® DEEP GAP FILLER is very easy to sand if necessary.
Deep holes up to 50mm can be filled in one application with no need to build up in several layers.
Any nail or screw heads should be painted over before filling, to prevent rusting.

Documents