Product Data Sheet Show all documents
EVERBUILD® JETCEM® DEEP

EVERBUILD® JETCEM® DEEP

Rapid repair sand and cement.

EVERBUILD® JETCEM® DEEP is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes, ideal for patching deep repairs on walls, floors, steps and kerbstones.

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Repairs deep holes from 25-150 mm in one application (for small holes <2.5 cm use Jetcem® Rapid).
  • Sets in the cold and wet.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Internal and external repairs to gaps, cracks, walls and floors.
  • Repairing flags, slabs, stones and bricks.
  • Patching steps and window sills.
  • Pointing brick and stone.
  • Jointing earthenware pipes and drains.
  • Repairs to ponds and pools.
  • Setting in W/C’s and sinks.
  • Leak sealing in concrete based surfaces.
  • Setting railings and posts.
 

Advantages

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Repairs deep holes from 25-150 mm in one application (for small holes <2.5 cm use Jetcem® Rapid).
  • Sets in the cold and wet.

Packaging

2 kg & 6 kg paper sack.

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

BSEN1504-3 Class R3
Product Information

Chemical Base

Cement and aggregates

Shelf Life

12 months in original unopened bag. This will reduce significantly once opened.

Storage Conditions

Store in cool dry conditions between +5 °C and +25 °C.  Storage outside these parameters will significantly reduce shelf life.

Application

Application steps

APPLICATION

  • Thoroughly wet surfaces to improve adhesion.
  • Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only.  MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES
  • Press the cement into the repair with a trowel or filling knife.
  • Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.
  • In warm conditions, cover EVERBUILD® JETCEM® DEEP with polythene to assist cure.

CLEANING OF TOOLS

Clean tools with warm water before EVERBUILD® JETCEM® DEEP dries.

Documents