Product Data Sheet Show all documents
EVERBUILD® JETCEM® RAPID

EVERBUILD® JETCEM® RAPID

Fast setting repair cement

EVERBUILD® JETCEM® RAPID is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use JETCEM® DEEP SAND/CEMENT).
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Internal and external repairs to gaps and cracks and walls and floors.
  • Repairing flags, slabs, stones and bricks.
  • Patching steps and window sills.
  • Pointing brick and stone.
  • Jointing earthenware pipes and drains.
  • Repairs to ponds and pools.
  • Setting in W/C’s and sinks.
  • Leak sealing in concrete based surfaces.
  • Setting railings and posts.
 

Advantages

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use JETCEM® DEEP SAND/CEMENT).

Packaging

3 kg & 6 kg bags

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Tested to BSEN1504-3 Class R4
Product Information

Chemical Base

Cement and aggregate

Shelf Life

12 months in original unopened bag. This will reduce significantly once opened.

Storage Conditions

Store in cool dry conditions between +5 °C and +25 °C. Storage outside these parameters will significantly reduce shelf life.

Application

Application steps

APPLICATION

  • Thoroughly wet surfaces to improve adhesion.
  • Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only. MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES.
  • Press the cement into the repair with a trowel or filling knife.
  • Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.
  • In warm conditions, cover EVERBUILD® JETCEM® RAPID with polythene to assist cure.
  • Clean tools etc with warm water before EVERBUILD® JETCEM® RAPID dries.
 

Documents