Product Data Sheet Show all documents
EVERBUILD 507 RENDAGRIP®

EVERBUILD 507 RENDAGRIP®

Quick drying, extra-grip render bonding agent

EVERBUILD 507 RENDAGRIP® is an extra-grip render bonding agent that contains a fine aggregate to provide an improved key before applying render on external surfaces e.g. concrete, lightweight blockwork, brick etc. The fine aggregates are suspended in a unique waterproof polymer to ensure easy application by roller or brush and an even spread of aggregate, avoiding any weak spots in the key coat and preventing the aggregate particles coming loose during application. EVERBUILD 507 RENDAGRIP® reduces the porosity/suction of the base substrate and provides a mechanical key from the fine aggregate suspended within the product.

  • Extra-grip render bonding agent
  • Contains a fine aggregate to improve render key
  • One coat application – render when dry
  • Red colour to indicate coverage
  • Reduces suction on porous substrates
  • Improves adhesion on smooth substrates
  • Can be applied to damp surfaces
  • Waterproof
      Viscosity at 23°C  15,000-50,000 cP Minimum Film Forming Temperature (°C) Approx 5 Bond Strength (EN13892-8) 3.2 N/mm2 High Temperature Stability (4 Weeks @ 50°C)Stable
Product Data Sheet Show all documents

Usage

  • As a bonding agent for render to concrete, brickwork, blockwork etc.
  • As a bonding agent to improve adhesion to smooth surfaces.
 

Advantages

  • Extra-grip render bonding agent
  • Contains a fine aggregate to improve render key
  • One coat application – render when dry
  • Red colour to indicate coverage
  • Reduces suction on porous substrates
  • Improves adhesion on smooth substrates
  • Can be applied to damp surfaces
  • Waterproof
      Viscosity at 23°C  15,000-50,000 cP Minimum Film Forming Temperature (°C) Approx 5 Bond Strength (EN13892-8) 3.2 N/mm2 High Temperature Stability (4 Weeks @ 50°C)Stable

Packaging

10L pail

Colour

Red liquid

Product Details

Product Information

Shelf Life

24 months in original unopened containers.

Storage Conditions

Store between 5°C and 25°C and protect from frost

pH-Value

8.0-9.5

 

Application

Consumption

Consumption

Approx 3.0m2 per litre depending on porosity of substrate
Application steps

APPLICATION

STIR WELL BEFORE USE. Use 1 coat only. Apply using a short pile roller or brush to give an even coating. EVERBUILD 507 RENDAGRIP® is coloured red to help avoid missing any areas.

Protect adjacent surfaces from splashes and remove any EVERBUILD 507 RENDAGRIP® before drying with warm soapy water. Allow to dry thoroughly before applying render (usually 6 hours minimum).

NOTE: drying time will be significantly extended at low temperatures.

Documents