Product Data Sheet Show all documents
EVERBUILD® 702 Water Resistant Tile Adhesive

EVERBUILD® 702 Water Resistant Tile Adhesive

Premium grade water resistant tile adhesive

EVERBUILD® 702 Water Resistant Tile Adhesive is a premium grade adhesive that can be used in areas subject to prolonged/permanent wet conditions and in areas of high humidity and condensation.

  • Excellent water resistance.
  • Extremely high bond strength - over double the B.S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed by shearing whilst wet).
  • Ready mixed formula - no mixing, no mess. Apply straight from the tub.
  • Easier to apply than most competitive adhesives.
  • Excellent non slip characteristics - no movement on a 300 x 200 standard large format wall tile.
  • Extended open time.
Product Data Sheet Show all documents

Usage

  • Suitable for use in areas that are subject to prolonged water contact
  • Designed for use in kitchens, bathrooms & power shower areas
  • For use with ceramic and porcelain wall tiles & mosaics
  • Acrylic formula for extra slip resistance & high bond strength
 

Advantages

  • Excellent water resistance.
  • Extremely high bond strength - over double the B.S. minimum requirement in wet shear (7 days drying, 7 days water immersion followed by shearing whilst wet).
  • Ready mixed formula - no mixing, no mess. Apply straight from the tub.
  • Easier to apply than most competitive adhesives.
  • Excellent non slip characteristics - no movement on a 300 x 200 standard large format wall tile.
  • Extended open time.

Packaging

7.5 kg & 16 kg tubs

Colour

Thick buff paste (dries off-white)

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

EN12004 type D2T.
Product Information

Shelf Life

12 months when stored according to manufacturer’s instructions.

Storage Conditions

Store at moderate (+5 to +30 °C) temperatures. PROTECT FROM FROST

Density

1.7 g/cm³ (approx) @ 20 °C
Technical Information

Shear adhesion strength

12 kN (typical wet shear)

Thermal Resistance

Service Temp -30 °C to 100 °C once cured.

Application

Application Information

Layer Thickness

3 to 6 mm

Ambient Air Temperature

+5 °C to +35 °C

Open Time

30 - 40 mins @20 °C

Curing Time

24 to 72 hours (depending on substrate).
Consumption

Consumption

Approximately 0.9 m²/kg (6 mm notched trowel) to 0.6 m²/kg (solid bed).
Application steps

APPLICATION

Surfaces to be tiled must be clean, dry and sound. Apply adhesive to wall at a depth of 3-6 mm (no less than 3 mm, no greater than 6 mm) combing out an area of no greater than 1 m2 at a time. In dry situations, use a suitable notched trowel across the surface of the adhesive before placing the tiles into position and securing with a slight twist action to remove air voids. 

In areas subject to wet conditions, do not use a notched trowel. Bed the tiles directly into the surface of the adhesive and, again, secure with a slight twist action. In both situations, it is good practice to periodically remove a tile and check that at least 75 % of the tile is covered in adhesive. If this is not the case, apply fresh adhesive and re-position.

CLEANING OF TOOLS

All surplus adhesive must be removed whilst adhesive is still wet using a dampened cloth or sponge, particularly along grout lines.

Documents