Product Data Sheet
Show all documents

Sika® Epoxy Mortar Repair Kit

A three-part general purpose repair mortar

Sika® Epoxy Mortar Repair Kit is a three-part general purpose repair mortar based on epoxy resin technology. Sika® Epoxy Mortar Repair Kit is formulated to withstand chemicals, impact and abrasion and can be used to repair concrete, screeds, stone and brick in even the most demanding domestic and commercial situations. Sika® Epoxy Mortar Repair Kit is the ideal product for repairing floors, steps, pipes, kerbs and sills. Sika® Epoxy Mortar Repair Kit is also the ideal choice for repairing cracks in masonry and concrete.

▪ Excellent chemical, impact and wear resistance.
▪ Can be laid in thin sections. ▪ Provides a higher physical strength than conventional cementitious systems.
▪ Easy to mix. ▪ Can be applied to damp surfaces. ▪ Application/curing temperature range +4 to +40 0C.
Seek a Stockist Contact Us
Product Data Sheet
Show all documents

Usage

For professional use only in repairs to:
▪ Heavy traffic areas.
▪ Steps.
▪ Walkways/ramps.
▪ Commercial floors.  

Advantages

▪ Excellent chemical, impact and wear resistance.
▪ Can be laid in thin sections. ▪ Provides a higher physical strength than conventional cementitious systems.
▪ Easy to mix. ▪ Can be applied to damp surfaces. ▪ Application/curing temperature range +4 to +40 0C.

Packaging

4 kg and 14 kg plastic tub.

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under EN1504-3:2005 Principle 3, Method 3.1. Concrete repair product for non structural repair. PC Mortar (based on epoxy resin).
Product Information

Shelf Life

24 months from date of manufacture in original unopened container.

Storage Conditions

Store in cool, dry conditions between +5 °C and +25 °C away from direct sunlight.

Density

2.03 g/cm3
Technical Information

Abrasion Resistance

High

Compressive Strength

50 N/mm2 at 24 hours (+20 °C)
58 N/mm2 at 28 days (EN 12910)

Modulus of Elasticity in Compression

65.5 N/mm2 (EN 134512)

Tensile Strength

15 N/mm2 @ 7 days (+20 °C)

Tensile adhesion strength

2.2 MPa (EN 1542)

Thermal Compatibility

3.3 MPa under dry cycling (EN13687-4)

Service Temperature

-20 to +50 °C

Application

Application Information

Pot Life

The pot life of this product is 20-25 minutes at +20 °C. Low temperatures will retard the cure. Do not apply below +4 °C.

Curing Time

Initial: 24 hours. Final: 7 days. Do not traffic for 24 hours.
Consumption

Consumption

4 kg of mixed product will cover approximately 0.6 m2 at 3 mm depth.
14 kg of mixed product will cover approximately 2.1 m2 at 3 mm depth.
Application steps

SUBSTRATE PREPARATION

Ensure surfaces are free from flaking material, dust, rust and grease. Saw/chisel edges to a defined area to a depth of 3 mm. When applying to steel, shot blast, grind, or emery to a bright finish and remove residues.

 

CLEANING OF TOOLS

Clean all tools immediately with Sika® Wonder Wipes, finishing solvent or white spirit before the compound dries.

Documents