High Grab Adhesive: When to Use It | Stixall® Maximum Grab

There are plenty of jobs where a general-purpose adhesive is exactly what you need.

And then there are the jobs where you position something, take your hand away and really don't want to watch it start sliding down the wall.

Heavy materials. Vertical surfaces. Awkward installations. Jobs where stopping to prop, brace or continually reposition what you've just fixed simply gets in the way.

These are the jobs where high initial grab really earns its place in the toolbox.

So, when should you reach for a high grab adhesive like Stixall® Maximum Grab?

Let's look at five applications where instant hold can make all the difference.

1. Fitting skirting boards

Get it positioned. Get it fixed. Get on with the job.

Skirting is a great example of where initial grab matters.

You're working along a wall, trying to keep everything accurately positioned while achieving a clean finish. An adhesive that allows the material to move after positioning isn't going to make life any easier.

Stixall® Maximum Grab is designed with extremely high initial grab, making skirting board installation one of its recommended applications.

The benefit?

Rather than the adhesive simply providing the eventual bond, Maximum Grab is designed to provide powerful initial hold from application, helping reduce movement and minimise reliance on temporary support.

Why Maximum Grab?

Extremely high initial grab
Designed for rapid fixing
Helps minimise temporary support
Particularly suited to vertical fixing

Maximum Grab moment: When getting the skirting into position is only half the battle and you want it to stay there.

2. Installing wall panels and cladding

Large panels introduce another challenge.

There is more material to position, more surface area to deal with and, when you're working vertically, gravity isn't exactly helping.

This is prime Maximum Grab territory.

Panels, cladding and vertical applications feature across the recommended uses in the existing Stixall® material.

The high initial grab helps keep materials positioned during installation, while the product's permanently flexible cured characteristics
make Maximum Grab suitable for applications where a rigid fixing isn't what you're looking for.

Why Maximum Grab?

Because once you've spent time getting a panel into exactly the right position, the last thing you want is:

Slip. Adjust. Reposition. Repeat.

Apply. Position. Grab.

That's much more like it.

3. Bonding brick slips

Brick slips are another good example of an application where you're combining weight with a vertical surface.

And it's that combination that makes high initial grab particularly useful.

Bonding brick slips is specifically included among the ideal applications in

Maximum Grab's role here is straightforward: provide extremely high initial grab to help reduce movement after positioning.

Why Maximum Grab?

You're not asking the product to seal a joint.

You're asking it to fix and hold.

4. Bonding a shower tray

Not every Maximum Grab job has to be on a wall.

Sometimes you want powerful hold because of the item you're installing rather than its orientation.

One current Stixall® campaign application uses Maximum Grab for bonding a shower tray to a cement floor, an application that was also reviewed internally as part of the campaign shot list.

It is a useful demonstration of the difference between grab and seal.

When bonding the tray, you need an adhesive.

For sealing other areas within the finished shower installation, the right product may be different.

That's precisely why Stixall® is now a family rather than trying to make every application tell the same product story.

Maximum Grab = the fixing job.

5. Heavy-duty vertical fixing

And then there are all those jobs that don't fit neatly into one category.

Panels. Trims. Building materials. Interior fit-outs. Other vertical installation work.

Rather than remembering an endless list of applications, there's actually an easier question to ask:

“Will high initial grab make this fixing easier?”

If you're bonding rather than sealing and the job involves a heavier item, a vertical surface or a fixing you don't want shifting after you've positioned it, that's a strong signal to consider Maximum Grab.

The product is specifically positioned within the Stixall® family for heavy items, fast fitting and immediate hold.

When should you choose Stixall® Maximum Grab?

Think about the job rather than simply the material you're bonding.

Ask yourself:

Is it heavy?

A powerful initial grab can help keep heavier items positioned during installation.

Is it vertical?

High initial grab becomes particularly valuable when gravity is working against you.

Do I want to minimise temporary support?

Maximum Grab is designed to provide powerful initial hold.

Am I fixing rather than sealing?

That's an important clue. Maximum Grab is the dedicated adhesive within the Stixall® family.

If the answer to one or more of those questions is yes, Stixall® Maximum Grab could be the Stixall® for the job.

One Stixall® family. The right product for the job.

Stixall® Maximum Grab is part of a three-product Stixall® family, giving trade professionals a clearer way to choose the performance they need for different jobs.

Stixall® Maximum Grab is the one to remember when immediate hold and heavy-duty fixing are the priority.

So next time you're faced with a heavy item, a vertical fixing or an installation where you really don't want your carefully positioned material going anywhere, remember:

Position it. Fix it. Get on with it.

Choose Stixall® Maximum Grab for maximum initial grab when the job demands it.