Product Data Sheet Show all documents

Sika® MouldBuster

A powerful, fast acting solution for removing algae, mould and green growth.

Sika® MouldBuster is a powerful, fast acting solution which is effective on most surfaces. It removes algae, mould and green growth without the need for scrubbing or pressure washing.

  • No scrubbing or pressure washing required.
  • Biodegradable – no bleaches or acids.
  • Helps protect against early regrowth.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

Treatment for the removal of all types of organic growth from surfaces including:
  • Patios.
  • Driveways.
  • Brickwork and masonry.
  • Roofs.
  • Most exterior hard surfaces.
 

Advantages

  • No scrubbing or pressure washing required.
  • Biodegradable – no bleaches or acids.
  • Helps protect against early regrowth.

Packaging

5 L plastic containers.

Colour

Violet

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Sika® MouldBuster is approved under the Control of Pesticides Regulation 1986 (as amended) and Regulation 1987 (as Amended) Northern Ireland for use as directed. HSE No 8376-GB/NI. 
Product Information

Shelf Life

24 months from date of manufacture in unopened containers and stored in accordance with below.

Storage Conditions

Store upright in original, tightly sealed container, and in a dry, cool and well-ventilated area (between +5˚C and 25˚C), protect from sunlight and frost.

Application

Application Information

Mixing Ratio

1 part Sika® MouldBuster to 4 parts clean water

 
Consumption

Consumption

4 m2/L once diluted (~100 m2 for 5 L once diluted to 25 L) 
Application steps

APPLICATION

Wearing suitable protective equipment, dilute 1 part of Sika® MouldBuster with 4 parts water in a watering can or a low-pressure sprayer. Apply diluted mix directly onto the affected surface, ensuring entire area is saturated. Leave to dry, keeping pets and children away from treated area during drying period.
Sika® MouldBuster works over several weeks to kill and remove mould and algae - results will be seen within days. Any stubborn growths can be removed by lightly brushing away once dead.

Recommendations

When diluting and applying wear suitable protective clothing, butyl rubber/nitrile gloves, eye protection (goggles) and face protection. Do not to breath mist or vapour. Take all precautions to avoid exposing eyes to liquid splashes, mists, and gasses. Wash hands and exposed skin after use and before meals.

Coverage
The approximate application rate is 4 m2 / litre when diluted as advised and applied with a garden sprayer – dependent on evenness and porosity of the surface.

 

Documents