Product Data Sheet Safety Data Sheet Show all documents

Sika® Oil Remover

High performance cleaner for drives, patio & paths.

Sika® Oil Remover is the quick and easy solution for removing oil, petrol, diesel and grease stains from driveways and garage floors. Sika® Oil Remover works on most common surface types including concrete, stone, tarmac, most common paving materials and BBQ areas. Sika® Oil Remover can also be used as a general cleaner to revive the look of pathways and patio areas.  

  • Ideal for spot and surface cleaning.
  • Ready to use, no diluting required.
  • Easy to use spray bottle.
  • Water clean up.
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Product Details

Product Information

Shelf Life

24 months form date of manufacture

Storage Conditions

KEEP AWAY FROM CHILDREN. Store away from alkaline products and bleach between 5 °C - 30 °C.

Density

~1.1 g/cm3

pH-Value

6.0 - 9.5

Application

Consumption

Consumption

Approx. 5 - 8 m2 per L

 
Application steps

SUBSTRATE PREPARATION

  • Remove any surface debris using a stiff broom.
  • Heavy green growth should be first treated with Sika® Patio Wizard prior to application of Sika® Oil Remover.

APPLICATION

Stain Removal

  • Sika® Oil Remover is supplied ready to use and does not require diluting.
  • Spray Sika® Oil Remover directly onto the stain, work in well with a stiff bristled brush and leave for 5 minutes.
  • Do not allow Sika® Oil Remover to dry on the surface.
  • Rinse thoroughly with clean fresh water whilst scrubbing with a stiff brush.
  • Further application required depending on level of soiling. Should this be necessary, repeat procedure until stains are removed
 

General Cleaning of Paths Patios etc.

  • Dampen surface to be treated with water.
  • Apply Sika® Oil Remover liberally over the area and work in well with a stiff brush.
  • Rinse thouroughly with clean fresh water whilst brushing.

Documents

FAQ

How do I use Sika® Oil Remover?

To use Sika® Oil Remover, simply shake, spray, and scrub. Apply directly to the stain, leave for up to 5 minutes, scrub with a stiff brush, then rinse thoroughly with clean water. Repeat if needed for stubborn or old stains. 

Can I use Sika® Oil Remover as a general patio cleaner?

Yes, in addition to oil and grease removal, Sika® Oil Remover also acts as a powerful all-purpose outdoor cleaner, ideal for lifting dirt and grime from patios, paths, and driveways. 

What is Sika® Oil Remover used for?

Sika® Oil Remover is a ready-to-use cleaner designed to remove oil, petrol, diesel, and grease stains from surfaces such as driveways, patios, garages, and paths. It also works as a general-purpose outdoor cleaner to refresh tired surfaces. 

What surfaces can I use Sika® Oil Remover on?

Sika® Oil Remover is suitable for block paving, tarmac, concrete, stone, and other hard outdoor surfaces. Always test a small, hidden area first to ensure compatibility, especially on coloured or decorative paving. 

Do I need to dilute Sika® Oil Remover?

No, Sika® Oil Remover is a ready-to-use straight from the bottle - no mixing or measuring required. Just apply and clean. 

Is Sika® Oil Remover safe for outdoor use?

Yes, Sika® Oil Remover is formulated for outdoor environments, safe on common paving materials, and cleans effectively without damaging your garden when used as directed. Avoid runoff into ponds or drains. 

Do I need any special tools or equipment to use Sika® Oil Remover?

No specialist tools are needed for Sika® Oil Remover. A stiff bristle brush and clean water are all you need to scrub and rinse the surface effectively. 

Can I use Sika® Oil Remover on wet surfaces?

For best results, apply Sika® Oil Remover to a dry surface. When cleaning a large area, lightly wet the surface first before application but avoid standing water. 

Does Sika® Oil Remover remove petrol and diesel stains?

Absolutely. The fast-acting formula of Sika® Oil Remover lifts the oil, petrol, diesel, and grease residues, making it perfect for garage floors and driveways where vehicles are parked.  

How long should I leave Sika® Oil Remover on before rinsing?

Allow Sika® Oil Remover to soak for up to 5 minutes to penetrate the stain. Don’t let it dry on the surface - scrub again while rinsing for best results.