Product Data Sheet Show all documents

SikaSeal® Flue Jointing Compound

READY MIXED, NON SETTING COMPOUND FOR JOINTING METAL FLUES

SikaSeal® Flue Jointing Compound is a finely dispersed asbestos free material with a stiff consistency. It will not harden completely and small movements can be accommodated without cracking. SikaSeal® Flue Jointing Compound is non-flammable and there is no risk of fire.

▪ Ready mixed formula
▪ Non setting to accommodate movement
▪ Temperature resistant up to 200°C
▪ Internal or external use
▪ Non flammable
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

▪ Jointing metal flues
▪ Low pressure air ducts
▪ Chasing pipes through brickwork  

Advantages

▪ Ready mixed formula
▪ Non setting to accommodate movement
▪ Temperature resistant up to 200°C
▪ Internal or external use
▪ Non flammable

Packaging

500 g and 1 kg tubs

Product Details

Product Information

Shelf Life

Up to 12 months when stored according to manufacturers instructions.

Storage Conditions

Store at between +5 °C to +30 °C in original containers. Keep out of direct sunlight.

Density

ca. 1.8 g/cm3
Technical Information

Service Temperature

-10 °C to +200 °C

Application

Consumption

Yield

1 kg will cover approx. 3 linear metres of joint depending on joint
Application steps

SUBSTRATE PREPARATION

For maximum adhesion ensure all surfaces are free from all loose dirt and contaminants i.e. rust, soot, dust etc.

APPLICATION

SikaSeal® Flue Jointing Compound should be used straight from the tub. Apply by hand or putty knife working well into the joint to completely fill it. When connecting flue pipes, wrap glass fibre rope around the spigot end before inserting to facilitate a tighter joint.

Documents