Product Data Sheet Show all documents

Cromar® Acrypol+ Scrim

A polyester mesh for use with Cromar Acrypol+

A 100 % polyester flexible mesh for use with Acrypol+ for filling and creating a seamless finish of any voids.

  • Enhances Acrypol+ applications by effectively bridging splits and cracks in roofs and gutters.
  • Exhibits strength, providing support over holes in roof sheets when combined with Cromar Acrypol+.
  • Easily cut to size with scissors and effortlessly forms to various surfaces.
  • The edges of the mesh remain flat without curling up, contributing to a clean and neat finish.
  • Easy to apply.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

For uses where extra reinforcement is needed;
  • Cracks in gutters.
  • Splits in felt and asphalts.
  • Cracks in asbestos sheets.
  • Over-filling voids.
 

Advantages

  • Enhances Acrypol+ applications by effectively bridging splits and cracks in roofs and gutters.
  • Exhibits strength, providing support over holes in roof sheets when combined with Cromar Acrypol+.
  • Easily cut to size with scissors and effortlessly forms to various surfaces.
  • The edges of the mesh remain flat without curling up, contributing to a clean and neat finish.
  • Easy to apply.

Packaging

Supplied in boxes of 5 rolls.

Colour

White.

Product Details

Product Information

Fibre type

Polyester mesh.

Shelf Life

 2 years.

Storage Conditions

  • Do not store in direct sunlight or in a high temperature, high-humidity atmosphere.
  • Storage temperature should preferably remain below +25 °C.
  • Rolls should be stored unopened/sealed in original packaging in a clean, dry and dust free storage area.

Dimensions

15 cm x 20 m 

Weight

 100 g/m2

Application

Application steps

APPLICATION INSTRUCTIONS

  • Before applying the scrim, it is crucial to clear the area of loose dirt, moss, and lichen.
  • Begin by applying a 20 cm wide coat of Acrypol+ over splits, cracks, and holes.
  • Subsequently, lay the 15 cm x 20 m reinforcement mesh into the wet Acrypol+, using a paintbrush to press it into position.
  • The final step involves reloading the brush and applying another coat of Acrypol+ onto the mesh, ensuring a secure and durable result.
 

Documents