Product Data Sheet Safety Data Sheet Show all documents

Cromar® Cold Gritting Adhesive

Cold chipping adhesive for flat and pitched roofs.

A solvent based, cold applied bituminous adhesive for bonding chippings to flat or low-pitched roofs. The adhesive is supplied ready to use and must not be diluted or heated. It is designed to bond a wide variety of aggregates to built up felt and mastic asphalt roof surfaces. It then provides a final solar reflective, weatherproof and damage resistant surface.

  • Cold-applied – no heating required.
  • Ideal for bonding mineral chippings to flat roofs.
  • Bitumen-based for excellent adhesion and weather resistance.
  • Enhances roof protection against UV and mechanical damage.
  • Easy to use with brush or mop application.
  • Fast-drying formulation for efficient application.
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Cold applied bituminous adhesive for bonding chippings to flat or low pitched roofs.
  • Compatible chippings; Limestone, Granite, White Calcined Spar, Flint, Gravel, Slate Mineral Chippings.
 

Advantages

  • Cold-applied – no heating required.
  • Ideal for bonding mineral chippings to flat roofs.
  • Bitumen-based for excellent adhesion and weather resistance.
  • Enhances roof protection against UV and mechanical damage.
  • Easy to use with brush or mop application.
  • Fast-drying formulation for efficient application.

Packaging

5 & 25 Litre metal/plastic containers

Colour

Black

Product Details

Product Information

Shelf Life

18 months

Storage Conditions

The product must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5 °C and 30 °C.

Application

Consumption

Consumption

Consumption is dependant upon the size of chippings to be bonded;


- Chippings sized 3-9 mm - 1.8 m² per Litre
- Chippings sized 12 mm - 1.3 m² per Litre
Application steps

CLEANING OF TOOLS

Tools may be cleaned with white spirit. Minor spillages should be wiped off surfaces before the paint has dried.
Major spillages should be mopped up immediately with an inert absorbent material such as sand and disposed of in accordance with regulations.

Documents