Product Data Sheet Show all documents

Cromar® Raised Angle Trim

Angle trim for the Cromar® PRO GRP and Flexiglass liquid roof systems.

The Cromar® Raised Angle Trim is a rigid GRP (glass reinforced polyester) edge profile designed to provide a secure, weatherproof upstand at the perimeter of flat roofing systems. It forms a clean, defined edge that prevents water run-off while directing surface water back into the roof area towards the intended drainage points.  

  • Consistent weight and thickness.
  • Excellent finish and appearance.
  • High strength and flexibility.
  • Excellent long-term durability.
  • Easy jointing.
  • Facilitates roof void ventilation.
  • Unique high adhesion finish.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • 105 mm vertical upstand provides a defined raised edge to contain water on flat roofs.
  • Manufactured from durable GRP, offering excellent weathering, UV resistance, and dimensional stability.
  • Lightweight but rigid profile designed to maintain shape and resist impact over time.
  • Clean, professional finish with smooth edges and uniform thickness.
  • Pre-formed corners and jointing pieces available for fast, consistent detailing.
  • Can be easily trimmed and fixed on-site with standard tools.

Advantages

  • Consistent weight and thickness.
  • Excellent finish and appearance.
  • High strength and flexibility.
  • Excellent long-term durability.
  • Easy jointing.
  • Facilitates roof void ventilation.
  • Unique high adhesion finish.

Packaging

Banded in 10 lengths of 3 m 

Product Details

Product Information

Shelf Life

Shelf life has not been determined due to the longevity of plastic items.

Storage Conditions

The product must be stored properly in undamaged sealed packaging, in dry conditions at temperatures between +5 °C and +30 °C.

Dimensions

105 mm x 85 mm

Length

3 m

Thickness

1.2 mm

Application

Application steps

APPLICATION INSTRUCTIONS

This trim is for use against an abutting wall or parapet. Place the trim against the wall making sure it sits squarely. Fix in place to decking, not to the wall, using ring shank nails, at 150-200 mm centres.

Where the Cromar® Raised Angle Trim needs to be joined by overlapping, use a bead of trim adhesive across the full width of the trim. For a cleaner line a “soaker” can be used. The whole join should then be bandaged, sealing both trims together. If the roof is to be left overnight without a flashing trim in place, a bead of adhesive should be used to seal the top edge of the trim to the wall, sealing the open point. The main flat area of the roof should be covered with a tarpaulin.

Documents