Product Data Sheet Show all documents

Leadax Flashing Easy FA

Leadax Flashing Easy FA - Fully adhesive Leadax lead-free flashing

 The fully self-adhesive lead replacement made from recycled polyvinyl butyral (r-PVB).

  • Lightweight
  • Malleable - similar to lead
  • Strong
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • For sealing around dormers, windows, chimneys, abutments, valleys and ridges.
 

Advantages

  • Lightweight
  • Malleable - similar to lead
  • Strong

Packaging

Individually wrapped in polythene sleeve with paper product label.

Colour

Grey

Product Details

Product Information

Shelf Life

25 years

Storage Conditions

Leadax Easy FA should be stored in a ventilated area, away from frost, humidity and at temperatures - 5 to + 30 °C. However, prior to use, the product must acclimatise to processing temperature of + 5 °C.

Dimensions

Characteristic Units   Value         
Length m          5
Width

 mm      150, 250, 300, 450

Overall Thickness

1.8 mm

Application

Application steps

SUBSTRATE PREPARATION

Ensure the surface is dry and free of dust and grease.

APPLICATION

Use Leadax scissors to cut to size and a Leadax roller to mould the product. The temperature needs to be above + 5 °C. Release the liner after pre-shaping by hand and roller.

Any overlap should be 80 mm making sure the area of Leadax Easy FA to be covered is free from dust and grease. Connections should be sealed with Leadax sealant. Remove the protective foil within 30 days.

Documents