Product Data Sheet Show all documents

SikaSeal® Sanitary Silicone +

A premium quality mid modulus acetoxy cure silicone sealant

SikaSeal® Sanitary Silicone + is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. Specifically designed for sanitary applications and for areas of high humidity. It contains a powerful fungicide to prevent mould growth to the sealant.

  • Will not discolour on aging even in humid/damp conditions.
  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Waterproof seal.
  • Certified under the harmonized European standard EN 15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • All internal sealing in areas of high humidity or subject to condensation.
  • Sealing around baths, showers, basins and sanitaryware.
  • Sealing around work tops and laminates.
  • As an adhesive for fixing PVCu trims and panels.
 

Advantages

  • Will not discolour on aging even in humid/damp conditions.
  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Waterproof seal.
  • Certified under the harmonized European standard EN 15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulation.

Packaging

295 mL Cartridge

Colour

White, Translucent, Ivory & Grey.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Meets ISO 11600 F and G 20LM.  EN 15651-1, 2 and 3.
Product Information

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in cool dry conditions between +5 °C and +25 °C.

Density

~1 g/cm3
Technical Information

Shore A Hardness

ca. 20

Tensile Strength

0.4 MPa at break (ISO 8339)

Shrinkage

≤10 % (ISO 10563)

Movement Capability

+/-20 % (ISO 9047)

Service Temperature

-40 °C to +150 °C

 

Joint Design

Joint Ratio - Maximum depth 50 % of joint width
Minimum Joint Width - 5 mm
Maximum Joint Width - 25 mm

Tensile stress at specified elongation

ca. 0.3 MPa at 100 % elongation (ISO 8339)

Elongation at break

>500 % (ISO 37)

Application

Application Information

Curing Time

3 mm per 24 hours (+23 °C and 50 % RH)

Skin Time / Laying Time

ca. 10 mins at +20 °C
Consumption

Consumption

9 x 9 mm fillet joint at 3.6 linear metres.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.

 

Documents