Sikaplan® DM-15 RoofPro Adhered

▪ Polymeric sheets for roof waterproofing according to EN 13956, certified by notified body 1213-CPD-4125 and provided with the CE marking.
▪ External fire performance tested according to ENV 1187 Brooft4 (subject to build-up).
▪ Official Quality Approvals and Agrement Certificates and approvals.
▪ Monitoring and assessment by approved laboratories.
▪ Quality Management system in accordance with EN ISO 9001/14001.
▪ Production according to Responsible Care policy of Chemical Industry.

5 years from date of production in unopened, undamaged and original packaging.

Rolls must be stored between +5 °C and +30 °C in a horizontal position on pallet, protected from direct sunlight, rain and snow. Do not stack pallets of rolls or any other material during transport or storage.

1.5 mm (-5 % / +10 %) (EN 1849-2)

Not compatible with direct contact to other plastics, e.g. EPS, XPS, or PF. Not resistant to tar, bitumen, oil and solvent containing materials.

BROOF(t4) (EN 13501-5) (subject to build-up).

The substrate surface must be uniform, smooth and free of any sharp protrusions or burrs, etc. Sikaplan® DM-15 RoofPro Adhered must be separated from any incompatible substrates by an effective separation layer to prevent accelerated ageing. Prevent from direct contact with bitumen, tar, fat, oil, solvent containing materials and direct contact to other plastic materials, e.g. expanded polystyrene (EPS), extruded polystyrene (XPS) and polyurethane (PUR) as this could adversely affect the product properties.

Installation works must be carried out only by trained contractors. Installation of some ancillary products, e.g. contact adhesives etc is limited to temperatures above +5 °C. Please refer to the respective Product Data Sheets. Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.