Sikaplan® DM-15 RoofPro MF

• Polymeric sheets for roof waterproofing according to EN 13956, certified by notified body 1213-CPD- 4125/4127 and provided with the CE-mark.
• External fire performance tested according to ENV 1187 and classified according to EN 13501-5: BROOF(t4) (subject to build-up).
• Quality Management system in accordance with EN ISO 9001/14001.

5 years from date of production in unopened, undamaged and original packaging.

Rolls must be stored between +5 °C and +30 °C in a horizontal position on pallet, protected from direct sunlight, rain and snow. Do not stack pallets of rolls or any other material during transport or storage.

1.5 mm (- 5 % / + 10 %) (EN 1849-2)

Not compatible with direct contact to other plastics, e.g. EPS, XPS, or PF. Not resistant to tar, bitumen, oil and solvent containing materials.

BROOF(t4) (EN 13501-5) (subject to build-up).

The substrate surface must be uniform, smooth and free of any sharp protrusions or burrs, etc. Sikaplan® DM-15 RoofPro MF must be separated from any incompatible substrates by an effective separation layer to prevent accelerated ageing. Prevent from direct contact with bitumen, tar, fat, oil, solvent containing materials and direct contact to other plastic materials, e.g. expanded polystyrene (EPS), extruded
polystyrene (XPS) and polyurethane (PUR) as this could adversely affect the product properties.

Installation works must be carried out only by trained contractors. Installation of some ancillary products, e.g. contact adhesives etc is limited to temperatures above +5 °C. Please refer to the respective Product Data Sheets. Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.