Product Data Sheet Show all documents
EVERBUILD® EVERFLEX® 225 Industrial & Glazing Silicone

EVERBUILD® EVERFLEX® 225 Industrial & Glazing Silicone

acetoxy-cure silicone sealant designed for glazing and industrial applications

EVERBUILD® EVERFLEX® 225 Industrial & Glazing Silicone is a mid-modulus acetoxy-cure silicone sealant that adheres to most smooth and non-porous substrates. EVERBUILD® EVERFLEX® 225 Industrial & Glazing Silicone cures quickly to provide a permanently flexible, high-strength waterproof seal. Typically used for single-glazing, draught-proofing and general industrial use.

  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Temperature resistant to 200°C.
  • Waterproof seal
Shrinkage <10% (ISO10563) Application temperature resistance +5°C to + 30°C Stress 0.3MPa at 100% elongation (DIN53504)
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Sealing glass to glass.
  • Sealing glass to aluminium and metal sealing.
  • Butt and channel glazing.
  • As an adhesive for fixing uPVC trims and cladding.
  • Sealing around worktops and laminated panels.
  • Cap glazing to metal, timber and uPVC window frames.
  • For aluminium gutter sealing.
  • Industrial uses, such as gasket sealing.
  • Refrigeration and hygiene sealing.
 

Advantages

  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Temperature resistant to 200°C.
  • Waterproof seal
Shrinkage <10% (ISO10563) Application temperature resistance +5°C to + 30°C Stress 0.3MPa at 100% elongation (DIN53504)

Packaging

295ml Cartridges

Colour

Black, Brushed Steel, White, Transparent

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulations.
Product Information

Shelf Life

24 months from date of manufacture

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C

Density

ca. 1.0 g/cm3
Technical Information

Shore A Hardness

15-25

Tensile Strength

1.2 MPa

Movement Capability

20% (ISO9047)

Service Temperature

-40°C to +200°C

Joint Design

Minimum joint width: 4mm

Maximum joint width: 25mm

Joint ratio: Maximum depth 50% of joint width

Application

Application Information

Curing Time

≤4mm per 24 hours dependent on humidity and temperature

Skin Time

5 - 10 mins @ 20°C
Consumption

Yield

>10 linear metres 7 x 7mm fillet joint
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.         

CLEANING OF TOOLS

Uncured sealant: white spirit. Cured sealant: EVERFLEX® SILICONE EATER.

 

Documents