Product Data Sheet Show all documents
EVERBUILD® Coving Adhesive & Joint Filler

EVERBUILD® Coving Adhesive & Joint Filler

A high strength solvent free grab adhesive for coving

EVERBUILD® Coving Adhesive & Joint Filler is a high strength solvent free adhesive that provides a quick “grab” for fixing polystyrene and plaster coving and cornices to sound porous surfaces. This product will also act as a filler for filling the gaps between individual lengths of coving. Coving Adhesive dries white and is overpaintable when dry.

  • Solvent free - environmentally friendly formulation
  • Excellent adhesion/bond strength - adheres to most common coving surfaces.
  • Exceptional early grab properties - usable in both vertical and horizontal positions.
  • High solids formulation - excellent gap filling properties.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Form White thixotropic paste (ready to use) Viscosity 350000-550000 cps (bfld HBDV2+, S70, 10RPM Typical Bond Strength (beech/beech 25mm²) 1 hour: 0.2 – 0.3 N/mm² 24 hour: 3.5 N/mm² 7 days: 4 N/mm²
Product Data Sheet Show all documents

Usage

  • For fixing and jointing polystyrene coving, ceiling centres tiles and other decorative polystyrene products to sound surfaces.
  • Fixing plaster coving.
  • Filling gaps between coving sections.
 

Advantages

  • Solvent free - environmentally friendly formulation
  • Excellent adhesion/bond strength - adheres to most common coving surfaces.
  • Exceptional early grab properties - usable in both vertical and horizontal positions.
  • High solids formulation - excellent gap filling properties.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Form White thixotropic paste (ready to use) Viscosity 350000-550000 cps (bfld HBDV2+, S70, 10RPM Typical Bond Strength (beech/beech 25mm²) 1 hour: 0.2 – 0.3 N/mm² 24 hour: 3.5 N/mm² 7 days: 4 N/mm²

Packaging

Cartridge

Product Details

Product Information

Shelf Life

24 months

Storage Conditions

Store in original unopened containers between 5°C and 25°C. Storage outside these parameters will reduce shelf life. PROTECT FROM FROST.

Density

1.58 g/cm³

Solid Content

70-80%
Technical Information

Service Temperature

-10°C to +70°C

 

Application

Application Information

Ambient Air Temperature

+5°C to +35°C

Pot Life

Max 10 mins at 23°C and 50% R.H
Application steps

SUBSTRATE PREPARATION

  • All surfaces must be sound, porous, clean, dry and free from dust, grease, loose material/flaky paint etc. Remove wallpaper from all areas in contact with adhesive.
  • Prime all substrates with EVERBUILD PVA BOND diluted 1 part PVA to 4 water and allow to dry.

Documents