Product Data Sheet Show all documents
EVERBUILD® 402 WaterSeal

EVERBUILD® 402 WaterSeal

Long lasting protection from water damage on mineral surfaces.

EVERBUILD® 402 WaterSeal is a high performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, pebbledash and rendering. Based on the latest technology silicone resins, EVERBUILD® 402 WaterSeal does not contain solvents harmful to the user or the environment and is non-flammable.  EVERBUILD® 402 WaterSeal penetrates deeply into the treated surface to provide effective water repellence for many years; is unaffected by ultra violet light and offers improved water beading compared with traditional solvent based products.

  • Improved durability and beading effect.
  • Solvent free formula.
  • Non-flammable.
  • May be applied by conventional garden spray.
  • May be applied to damp surfaces.
  • Reduces water penetration so that water “beads up” on the surface, whilst still allowing the surface to breathe and any moisture vapour to evaporate.
Active Components Emulsified polysiloxane (silicone) resin in water Coverage 5 – 8 m² / litre depending on porosity and nature of surfaces being treated.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

As an effective water repellent on:
  • Brick.
  • Stone.
  • Render.
  • Pebble dashing.
 

Advantages

  • Improved durability and beading effect.
  • Solvent free formula.
  • Non-flammable.
  • May be applied by conventional garden spray.
  • May be applied to damp surfaces.
  • Reduces water penetration so that water “beads up” on the surface, whilst still allowing the surface to breathe and any moisture vapour to evaporate.
Active Components Emulsified polysiloxane (silicone) resin in water Coverage 5 – 8 m² / litre depending on porosity and nature of surfaces being treated.

Packaging

5 L & 25 L Jerry Can

Colour

Milky White – Dries Clear

Product Details

Product Information

Shelf Life

12 months from date of manufacture. Note that the product towards the end of this period may separate into white and clear layers. Simply shake well before applying to reconstitute. This is aesthetic and will not affect the performance of the product.

Storage Conditions

Store in dry conditions between +5 and +25 °C, protect from frost.

Application

Application steps

APPLICATION

Shake well before use. Do not dilute. Apply using brush, spray or roller. On vertical surfaces apply from bottom up. Ensure the whole area to be treated is saturated. On horizontal surfaces saturate and brush in any puddles after 15-20 minutes. Apply in two coats, applying the second coat whilst the first coat is still damp (within 1 hour).

Documents