Safety Data Sheet Show all documents
RESIBLOCK TRADE PAVING SEALER

RESIBLOCK TRADE PAVING SEALER

Engineered for the seasoned trade professional, Resiblock Trade is an eco-friendly, solvent-free sealer designed to bond jointing sand and protect the surface of virtually any paver type. 

Resiblock Trade is an entry level jointing sand stabiliser and sealer, based on a low viscosity thermoplastic-acryl copolymer emulsion.  Whitish in liquid state but becomes clear when dry.  It incorporates a completely unique moisture drying system eliminating the problems common to conventional solvent acrylic systems.  Since it is solvent free it does not give off unpleasant odours.  Its function is to bind the particles of sand together and to vertical faces of the paver.  Resiblock Trade is suitable for most paver types.

  • Eco-Friendly & Solvent-Free: Low odour, non-flammable, and safe.
  • Stain Resistant: Keeps your paving spotless over time.
  • Preserves Natural Appearance: Protects while preserving pavers' true charm.
  • Weed & Grass Prevention: Ensures clean, neat joints every time.

Seek a Stockist Contact Us
Safety Data Sheet Show all documents

Usage

 

Surface Preparation: Surfaces to be treated must be dry, free from grease, oil, debris and previous sealers. Joints should be filled or topped up to the bottom of the chamfer with clean, dry, compacted sand of the correct specification.

Coverage: Concrete & Clay Block Paving 1.8—2.2m² per litre. Flag Paving 2.2—4m². If in doubt contact Resiblock Technical on 01268 273344.

Application: By brush, roller, spray or squeegee (STIR WELL BEFORE USE) generally the paver type will dictate the most appropriate application tool. Ensure sand filled joints are fully flooded with RESIBLOCK TRADE. Work the product into the joints for maximum penetration. Ensure the surface is evenly coated. PLEASE NOTE: The product must not be allowed to pond within the depressions of riven surfaces, remove with builders sponge/dry roller. Clean accidental spills and splashes immediately with a clean damp cloth.

Curing: Curing commences immediately, to leave surface dry after approximately 4-8 hours (depending on weather conditions).

Appearance: RESIBLOCK TRADE contains micronised particles that produce an opaque appearance when wet but will be clear when dry. We recommend the application of a trial area where the appearance of the treated surface is of particular importance and to test that the paving is sufficiently porous to absorb the solution evenly and without leaving a surface film.

 

Advantages

  • Eco-Friendly & Solvent-Free: Low odour, non-flammable, and safe.
  • Stain Resistant: Keeps your paving spotless over time.
  • Preserves Natural Appearance: Protects while preserving pavers' true charm.
  • Weed & Grass Prevention: Ensures clean, neat joints every time.

Documents