Product Data Sheet Show all documents
Feb® Febmix® Plus

Feb® Febmix® Plus

Mortar plasticiser

Feb® Febmix® Plus is a liquid ultra stable ‘micro’ air entraining mortar plasticiser designed to enhance the workability and freeze thaw resistance of brick and block laying mortars. Feb® Febmix® Plus may be used to replace the use of lime, and is designed to maintain efficiency with variations in cement and aggregate sources.

  • Ultra stable bubble structure.
  • Uniform air entrainment structure.
  • Works with most types of Portland Cement and difficult sands.
  • Increased resistance to damage by freeze/thaw.
  • Reduced segregation and bleed.
  • Non corrosive to embedded metals.
  • Increased working time.
  • Easier and faster mortar spread.
  • Can be used with P.F.A. containing mortars.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Designed to be used as a mortar plasticising admixture in brick and block laying mortars
  • ‘Micro’ air entraining properties reduce water demand and greatly reduce the likelihood of cracking and crazing.
  • Provides enhanced resistance to frost attack in both wet and hardened mortar state.
 

Advantages

  • Ultra stable bubble structure.
  • Uniform air entrainment structure.
  • Works with most types of Portland Cement and difficult sands.
  • Increased resistance to damage by freeze/thaw.
  • Reduced segregation and bleed.
  • Non corrosive to embedded metals.
  • Increased working time.
  • Easier and faster mortar spread.
  • Can be used with P.F.A. containing mortars.

Packaging

5 L and 25 L

Colour

Dark Brown

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Feb® Febmix® Plus conforms to EN 934 Part 3 specification for air entraining (plasticising) mortar admixtures.
Product Information

Shelf Life

Two years when stored in accordance with the manufacturer’s instructions

Storage Conditions

Store at moderate (5 - 25 °C) temperatures. Will freeze, but can be reconstituted by stirring after thawing. Stir before use.

Density

0.98 - 1.02 g/cm3

Conventional Dry Material Content

1.43 - 1.75 %

pH-Value

7.4 - 9.4

Total Chloride Ion Content

< 0.1 % (w/w)

Application

Application Information

Substrate Temperature

Freezing point -2 °C

 
Consumption

Consumption

125 to 250 ml per 50 kg cement
Application steps

MIXING

In all cases, add to mix or to gauging water at an addition rate of 125 ml to 250 ml per 50 kg cement, depending on the degree of plasticizing/entrainment required. Note: remember to reduce required quantity of water accordingly. One litre of Feb® Febmix® Plus added to a 200 L drum of gauging water will be sufficient for gauging approx. 4 x 50 kg cement for mortar or render mixes.

Documents