Product Data Sheet Show all documents
Feb® General Purpose PVA

Feb® General Purpose PVA

Multi-purpose, quick drying adhesive, sealer, PRIMER AND ADMIXTURE

Feb® General Purpose PVA is a multi purpose quick drying PVA adhesive, sealer and bonding agent and cement admixture which has many applications in the building and DIY markets. Bonds a wide variety of building materials including wood, plaster, concrete and ceramics.

  • Numerous applications in the building industry from one product.
  • Economical and simple to use.
  • Exceptional adhesive properties.
  • Quick drying.
Viscosity @ 23°C 70 – 150 poise Minimum Film Forming Temperature (°C) ca. 2 High Temperature Stability (1 week @ 50°C)               Stable
Product Data Sheet Show all documents

Usage

  • As an adhesive for most common building materials -  Feb® General Purpose PVA will bond most common building materials to themselves and to each other.
  • As a bonding agent for cement screeds and render, plaster and concrete - Feb® General Purpose PVA will bond cement screeds, rendering and plaster to most sound surfaces such as concrete, stone and brick and new concrete to old without the need for abrading the surface to form a key.
  • As an admixture for mortar and an admixture in cements/sand and granolithic screeds - Feb® General Purpose PVA enables thin,  jointless floor toppings to be laid.
  • As a sealing coat - applied to porous concrete renders, plaster, plasterboards and granolithic floors as a sealer, Feb® General Purpose PVA minimises dusting.
 

Advantages

  • Numerous applications in the building industry from one product.
  • Economical and simple to use.
  • Exceptional adhesive properties.
  • Quick drying.
Viscosity @ 23°C 70 – 150 poise Minimum Film Forming Temperature (°C) ca. 2 High Temperature Stability (1 week @ 50°C)               Stable

Packaging

5kg jerry

Colour

White

Product Details

Product Information

Shelf Life

Up to 12 months if stored in unopened containers according to manufacturer’s instructions.

Storage Conditions

Store at ambient (5 - 25°C) temperatures - protect from frost.

Density

ca. 1.03 g/cm3

pH-Value

4 - 6

Application

Consumption

Consumption

As a primer/adhesive

Neat 1 litre per 6-12 m2.  

Diluted 1:4: 1 litre per 24-48 m2.

Diluted 1:3: 1 litre per 18-36 m2.

The above figures will vary according to the degree of porosity and texture of the surface to which Feb® General Purpose PVA is applied.

As an admixture:

Feb® General Purpose PVA is added at the rate of 10 to 15 litres per 50 kg of cement used i.e. approx. 100 to 150 litres per cubic metre of mortar.
Application steps

CLEANING OF TOOLS

Clean all equipment in water immediately after use.

Documents