EVERBUILD® 101 Linseed Oil Putty

Up to 6 months when stored according to manufacturers instructions.

Store at moderate temperatures. Product will stiffen at low temperatures.

Approx. 2.0 g/cm³ 

Low

-20 °C to +70 °C.

+5 °C to +30 °C.

Between 7 and 28 days after glazing.

Skin forms after approximately 2 - 4 days outdoors, dependent on ambient temperature and humidity.

For putty facing, coverage will be between 3 and 5 metres per kg depending on rebate dimensions and frame type.

All surfaces must be clean, dry and free from dust, grease and other contamination.

PRIMING

All timber frames must be sealed either with an oil based primer or with two coats of timber sealer prior to glazing.

Painted steel frames may be glazed without any further preparation. Galvanised frames must be passivated or allowed to weather naturally prior to glazing. Check that suitable primers (Calcium plumbate, zinc chromate) have hardened sufficiently by gently wiping with white spirits.