Product Data Sheet Safety Data Sheet Show all documents

Sika® Primer-115

Transparent 1-part reactive polyurethane primer.

Sika® Primer-115 is a 1-part transparent reactive PU based primer.

  • Easy to apply
  • Clear finish
  • Short flash-off time
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

The Product is used as a:
  • Pre-treatment on porous substrates before Sikaflex® applications.
  The Product is used as a primer for the following substrates:
  • Concrete and cementitious substrates.
  • Brick masonry.
  • Cut asphalt (according to EN 13108-1 and EN 13108-6 with minimum 50 % aggregates on the surface).

Advantages

  • Easy to apply
  • Clear finish
  • Short flash-off time

Packaging

1000 ml bottle: 4 bottles per box

Refer to the current price list for available packaging variations.

Colour

Clear liquid

Product Details

Product Information

Chemical Base

Solvent-based reactive 1-part polyurethane Primer based on Sika® Purform® technology.

Monomeric diisocyanate content <0.1 %: no user safety training needed (REACH restriction 2023, Annex XVII entry 74)

Shelf Life

9 months from the date of production

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5°C and +25°C. Always refer to packaging.

Density

~1,0 kg/l

(EN ISO 2811-1)

Viscosity

~10 mPa·s

(ISO 3219)

 

Application

Application Information

Product Temperature

Maximum

+40 °C

Minimum

+5 °C

Substrate Temperature

Maximum

+40 °C

Minimum

+5 °C

Note: During application and cure the temperature of substrate must be minimum +3 °C above the dew point.
Consumption

Yield

Substrate type

Surface area

Linear metre joint

Porous

~5 m2 / 1 L bottle

~250 m / bottle

Non porous

~8 m2 / 1 L bottle

~400 m / bottle
Application steps

SUBSTRATE PREPARATION

The substrate must be clean, dry, sound and free from oils, grease, dust, cement laitance and loose or friable particles.

Note: Primers and activators are adhesion promoters and not an alternative to improve poor preparation or cleaning of the joint surface. Primers also improve the long term adhesion performance of the sealed joint.

APPLICATION

Apply a single coat to the prepared substrate using either a clean brush or roller. Tightly re-seal container immediately after each use.

Use within 1 month after opening the container. Discard any primer that has gelled or separated.

 

CLEANING OF TOOLS

Clean all tools and application equipment immediately after use. Hardened material can only be removed mechanically.

Documents