Product Data Sheet Safety Data Sheet Show all documents
Sikacryl®-625 Fire+

Sikacryl®-625 Fire+

Fire resistant ablative coating for linear seals and penetrations

Sikacryl®-625 Fire+ is a 1-part fire resistant, ablative acrylic coating used for the installation of SikaSeal®-626 Fire Board+.

  • Up to 4 hours fire resistance.
  • 1-part ready to use, easy to apply.
  • Easy to clean.
 
Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Covers linear seals up to 120 mm in combination with mineral fibre backing.
  • Edge coating of SikaSeal®-626 Fire Board+ when installed on the outer face of a wall or floor.

Advantages

  • Up to 4 hours fire resistance.
  • 1-part ready to use, easy to apply.
  • Easy to clean.
 

Packaging

3L Pail

Colour

White

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • Conformity with LEED v4 EQc 2: Low-Emitting Materials.
  • VOC emission classification M1.

APPROVALS / STANDARDS

  • CE Marking and Declaration of Performance to European Technical Assessment ETA 21/1034, based on EAD 350141-00-1106:2017 - Fire stopping and fire sealing products, linear joint and gap seals.
  • Fire Resistance EN 13501-2, UL-EU, Certificate No.UL-EU-01214-CPR.
Product Information

Chemical Base

Water based acrylic

Shelf Life

12 months from the date of production.

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C.
Always refer to packaging.

Density

~1.3 kg/l

(ISO 1183-1)
Technical Information

Service Temperature

−20 °C min. / +70 °C max.

Resistance to fire

Refer to SikaSeal®-626 Fire Board ‘Approvals / Certificates’ or contact Sika Technical Services for specific information.

 

Application

Application Information

Ambient Air Temperature

+5 °C min. / +40 °C max.

Substrate Temperature

+5 °C min. / +40 °C max., min. +3 °C above dew point temperature.
Application steps

SUBSTRATE PREPARATION

The substrate must be clean, dry, sound, free from oils, grease, dust and loose or friable particles. Sikacryl®-625 Fire+ adheres without primers and/or activators.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically.

Documents

Fire Stopping Solution Finder

FIND A SOLUTION