UsageSika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.
- Easy to apply
- Water repellent
- Short flash-off time
1 ltr bottle
1-component, solvent-based epoxy resin compound
Sika® Primer-3 N has a shelf life of 9 months from the date of production, if it is stored in undamaged, original, sealed packaging, and if the storage conditions are met.
Sika® Primer-3 N shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C.
1.00 kg/l approx.
10 mPa*s approx.
Ambient Air Temperature
+5 °C to +40 °C, min. 3 °C above dew point temperature
+5 °C to +40 °C
Minimum 30 minutes
Maximum 8 hours
|Yield per litre||Linear meters per litre|
On porous substrates
|5 m2||250 m|
|On non-porous substrates|
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Cement laitance must be removed.
CLEANING OF TOOLS
Clean all tools and application equipment immediately after use. Once cured, residual material can only be removed mechanically.