Product Data Sheet Show all documents
EVERBUILD® 101 Linseed Oil Putty

EVERBUILD® 101 Linseed Oil Putty

Multi-purpose glazing compound for wood and metal frames

EVERBUILD® 101 Linseed Oil Putty is specially formulated using only the best grade linseed oil, for glazing single glass into metal, softwood and hardwood window frames.

  • Easier to apply than most competitive putties.
  • Extended shelf life.
  • For wood and metal frames.
  • Added plasticiser improves adhesion and helps prevent cracking.
                                 
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Single glazing of pre-treated wooden and metal rebates.
 

Advantages

  • Easier to apply than most competitive putties.
  • Extended shelf life.
  • For wood and metal frames.
  • Added plasticiser improves adhesion and helps prevent cracking.
                                 

Packaging

0.5kg, 1kg, 2kg and 5kg (Natural only)

Colour

Brown, Natural

Product Details

Product Information

Shelf Life

Up to 6 months when stored according to manufacturers instructions.

Storage Conditions

Store at moderate temperatures. Product will stiffen at low temperatures.

Density

Approx. 2.0 g/cm3 
Technical Information

Movement Capability

Low

Service Temperature

-20°C to +70°C.

Application

Application Information

Ambient Air Temperature

5°C to 30°C.

Curing Time

Overpaint when skin has formed, between 7 and 28 days after glazing.

 

Skin Time

Skin forms after approximately 2 - 4 days outdoors, dependent on ambient temperature and humidity.
Consumption

Yield

For putty facing, coverage will be between 3 and 5 metres per kg depending on rebate dimensions and frame type.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and free from dust, grease and other contamination.

PRIMING

All timber frames must be sealed either with an oil based primer or with two coats of timber sealer prior to glazing.

Painted steel frames may be glazed without any further preparation. Galvanised frames must be passivated or allowed to weather naturally prior to glazing. Check that suitable primers (Calcium plumbate, zinc chromate) have hardened sufficiently by gently wiping with white spirits.

Documents