Product Data Sheet Safety Data Sheet Show all documents
EVERBUILD® EVERFLEX® 200 Contractors LMA Silicone

EVERBUILD® EVERFLEX® 200 Contractors LMA Silicone

Contractors grade acetoxy cure silicone sealant

EVERBUILD® EVERFLEX® 200 Contractors LMA Silicone is a cost effective Acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to protect the sealant against the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. EVERBUILD® EVERFLEX® 200 Contractors LMA Silicone is mid to low modulus in nature.

  • Permanently flexible
  • Anti-fungal formula 
  • Quick curing - low dirt pick up
  • Low viscosity for fast application
Application temperature resistance+5°C to +40°CMinimum joint width4mmMaximum joint width25mmJoint ratioMaximum depth 50% of joint width
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Sealing aluminium and metal.
  • Sealing around baths, showers, basins and other sanitary ware.
  • As an adhesive for fixing PVCu trims, cladding and panels.
  • Sealing around worktops and laminates.
  • Pointing and door frames.
  • For aluminium gutter sealing.
  • General draughtproofing.
 

Advantages

  • Permanently flexible
  • Anti-fungal formula 
  • Quick curing - low dirt pick up
  • Low viscosity for fast application
Application temperature resistance+5°C to +40°CMinimum joint width4mmMaximum joint width25mmJoint ratioMaximum depth 50% of joint width

Packaging

295ml Cartridge

Colour

Black, Brown, Translucent and White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade and sanitary applications in compliance with the Construction Product Regulations
Product Information

Shelf Life

24 months from date of manufacture

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C. 

Density

~1 g/cm3
Technical Information

Shore A Hardness

15 - 25

Secant Tensile Modulus

0.2MPa @ 60% (ISO8339)

Movement Capability

+ or -12.5% (ISO8339)

Service Temperature

-30°C to +150°C

Application

Application Information

Curing Rate

2mm per 24 hours

Tooling Time

Smooth down within 15 minutes of application
Consumption

Yield

12 linear metres, 7 x 7mm fillet joint
Application steps

SUBSTRATE PREPARATION

Reference should be made to the recommended joint ratios. If necessary reduce joint depth using Fix and Fill Expanding Foam, or Joint backer rod. Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.

CLEANING OF TOOLS

Uncured sealant - white spirit

Cured sealant - Everflex Silicone Eater

Documents