Sika Everbuild Products

• Excellent impact and wear resistance.
• Resistant to picking by fingers.
• Excellent primerless adhesion to most surfaces, including metals, most plastics and glass.
• Excellent resistance to chemicals & petrol (10% dilute acids, alkalis, most solvent).
• Overpaintable with certain paints (compatibility test should be made).
• Can be applied on damp surfaces.
• High mechanical properties.
• Passed for use on different home office, national offender management services and ministry of justice projects.

Consistency Paste Application Temperature 5 to 35°C Sagging (ISO 7390) Nil Shrinkage (ISO 10563)<5%Compatibility With PaintsWater Based: Yes (test compatibility) Solvent Based: No (with Alkyd Paints)CoverageApproximately 11 linear meters per cartridge

• When exposed to heat, it swells greater than 3 x it’s original size, so creating a char that will resist the passage of fire for up to 5 hours.
• No priming required for most construction substrates.
• Joint movement capability of +/- 12.5%.
• For use in joints up to 50mm wide.
• Halogen free.
• Non slump - easy to apply and tool off.
• Tack free in 15 minutes.
• Over paintable.
• Excellent acoustic properties for sound deadening –average noise reduction of 29dB.

• Fire rated to BS EN 1366-4:2010
• Neutral cure – adheres to most building surfaces, porous and non porous.
• Permanently flexible (25% movement accommodation).
• Excellent weathering characteristics – suitable for internal and external use.
• Can be used in joints up to 50mm wide.
• Non slump - easy to apply and tool off.
• Forms an acoustic seal.

 

• Will adhere to damp surfaces
• May be used on trafficked floor joints (after suitable cure period) on joints less than 15mm wide
• Over paintable with common acrylic based paints

Solvent content Nil Toolability Good Viscosity:  Ca: 120,000- 300,000 cP  Resistance-50 to +100˚C

• Good slump resistance.
• Abrasion resistant.
• Excellent resistance to chemicals & petrol (10% dilute acids, alkalis, most solvent).
• Good flexibility (±20% façade).
• Overpaintable with most paints (compatibility test should be made prior to full scale application).
• Can be applied on damp/wet surfaces.

  Consistency Paste Application Tempreature +5^oC to 50^oC Services Tempreature -40^oC to +90^oC Resistance to UV RadiationExcellent
  Coverage Joint Size Litre per metre run Metre per 600ml foil 6 x 10 0.06 10 20 x 20 0.4 1.5 25 x 200.51.230 x 200.61.040 x 251.0 0.6

• Excellent trafficking resistance
• Good slump resistance - suitable for wide joint applications (up to 65mm)
• Abrasion resistant
• Excellent resistance to chemicals & petrol (10% dilute acids, alkalis, most solvents)
• Good flexibility (Butt Joints ±25%, Lap Joints ±25%)
• Overpaintable with most paints (compatibility test should be made)
• Can be applied on damp surfaces

  Application temperature +5°C to 50°C Trafficking (at 20˚C/50% RH) Foot Traffic: 24 Hours FLT: 4 Days. SaggingNoneModulusHighWater and salt spray resistance (EN15651-4)Excellent

• Quick and easy to apply
• Reduces sealant usage
• Improves sealant performance by obtaining easily the correct joint dimensions
• Flexible – won’t bubble or blister

• Excellent tooling and slow skinning properties for large scale construction and glazing applications.
• Excellent adhesion - adheres to most common surfaces including glass, metals, plastics and wood (painted or unpainted), uPVC and polycarbonate.
• Excellent external weathering properties (over many years exposure).
• High viscosity non slump formula.
• Resistant to fumed Hydrogen Peroxide and fumed Formaldehyde.

Shrinkage ISO10563 <5% Tensile Modulus at 100% Elongation ISO 8339 23°C0.25—0.3MPaTensile Adhesion Strength at Break0.5MPaCompressive Modulus 100% ISO 114320.35 MPaMovement Factors Maximum Compression 35% Maximum Elongation 100% (for a 20mm wide joint min 13mm max 40mm)

• Excellent tooling properties for large scale construction and glazing applications.
• Excellent adhesion—adheres to most common surfaces including glass, metals, plastics and wood (painted or unpainted), uPVC and polycarbonate.
• Excellent external weather properties

                                                                                                                                                                                                                                                    Joint Dimensions For maximum movement accommodation, it is recommended that:
1/ The sealant joint width should be no less than 5mm
2/ Joint depth should be half width e.g. 30mm wide and 15mm deep

Joint depth may be adjusted to the correct size using EVERBUILD JOINT BACKER ROD.  Bond Breaker Tape can be used to prevent 3 sided adhesion in situations where EVERBUILD JOINT BACKER ROD would have a negative effect on joint dimensions.

• High viscosity formula for quick easy tooling.
• Flexible - movement accommodation of +/- 20%.
• Waterproof seal.
• Contains a powerful anti fungal compound to prevent mould growth.

· Excellent impact, wear and chemical resistance · Resistant to picking · Passed for use on different Home Office, National Offender Management Services and Ministry of Justice projects. · Smooth, glossy finish · Suitable for permanent water immersion Compressive Strength ca. 50 N/mm²

• Works on most common non-porous building materials.
• Works with all common silicone types.
• Can also be used with PU and hybrid based sealants.

Boiling Point 116-142°C Odour Slight

• Works on most common porous building materials.
• Acts as a primer for dusty screeds.
• Works with all common silicone types.
• Can also be used with PU and hybrid based sealants.

Odour Armomatic Boiling Point 111°C Working Temperature5 to 40°CDrying Time @ 20°CApprox 30 minutes

• Mould Resistant for up to 10 years (simulated age testing for internal use) AATCC 30 part 3 with Mould Shield.

 

• Bacterial resistance for up to 10 years (simulated age testing for internal use)  ISO22196.
• Excellent tooling and slow skinning properties for industrial/large scale applications.
• Excellent adhesion properties to most surfaces including glass, metal, plastics, wood (painted/unpainted) uPVC and Polycarbonate.
• High viscosity non-slump formula.
• Excellent external weathering properties.
• Resistant to fumed hydrogen peroxide and formaldehyde.
• Shrinkage to ISO 10563: <5%