Product Data Sheet Safety Data Sheet Show all documents

SikaForce®-436 L120

(former ADEKIT A 236-120)

Adhesive for large composite parts

SikaForce®-436 L120 is a structural 2- component polyurethane adhesive, which cures at room temperature. It is designed for bonding large composite or coated metal components. Whilst uncured, it has very good non-sag and compressibility behaviour combined with easy tooling.  

  • Good non-sag behaviour and tooling
  • Gap-filling up to 30 mm in vertical applications and up to 60 mm in horizontal applications
  • Combining long open time with reduced handling time
  • Odour and solvent free
  • Usable with dispensing machines equipped with pressure vessels
 
Find a Distributor
Product Data Sheet Safety Data Sheet Show all documents

PRODUCT BENEFITS

  • Good non-sag behaviour and tooling
  • Gap-filling up to 30 mm in vertical applications and up to 60 mm in horizontal applications
  • Combining long open time with reduced handling time
  • Odour and solvent free
  • Usable with dispensing machines equipped with pressure vessels
 

Usage

SikaForce®-436 L120 is suitable for structural elastic bonding of composites (e.g., CFRP, GFRP) or coated metals in marine, transportation and general industry. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.  

Packaging

SikaForce®-436 L120 (A+B)

Dual cartridge

400 ml

Mixer: Turbo Bell Mixer 180AN-824

 

Product Details

Typical Product Data
Properties

SikaForce®-436 L120 

SikaForce®-436 (B)

Chemical base

Polyol 

Isocyanate

Colour (CQP001-1)

  

Light blue

Beige

Density (uncured)

  

mixed (calculated)

1.29 g/cm3

1.40 g/cm3

1.35 g/cm3

Mixing ratio

by volume at 25 °C

by weight

100 : 100

92 : 100

Viscosity

at 15 s-1

95 Pa·s A

55 Pa·s A

Open time (CQP046-11 / ISO 4587)

120 minutes B, C

Handling time (CQP046-11 / ISO 4587)

360 minutes B, C

Shore D hardness (CQP023-1 / ISO 868)

55

Tensile strength (CQP036-1 / ISO 527)

12 MPa B, D, E

Elongation at break (CQP036-1 / ISO 527)

60 % B, D, E

E-Modulus (CQP036-1 / ISO 527)

85 MPa B, D, E

Tensile lap-shear strength (CQP046-9 / ISO 4587)

16 MPa B, C, D

Service temperature (CQP513-1)

-40 °C ─ 120 °C D

Shelf life

9 months

CQP = Corporate Quality Procedure

A) tested at 25 °C

B) 23 °C / 50 % r. h.

C) adhesive layer: 25 x 12.5 x 0.2 mmD) cured for 16 hours at 70 °CE) specimen type 1 acc. to ISO 37
Technical Information

CURE MECHANISM

The curing of SikaForce®-436 L120 takes place by chemical reaction of the two components. Higher temperatures (max. 100 °C) speed up and lower temperatures slow down the curing process. High humidity reduces the open time as well.

CHEMICAL RESISTANCE

The chemical resistance is influenced by several factors such as chemical composition, concentration, period of exposure and temperature. Therefore a project related testing in case of chemical or thermal exposure is required.

Application

Application Information

Surface Preparation

Surfaces must be clean, dry and free from grease, oil and dust.
Based on the surface and type of material, a physical or chemical pre-treatment might be required. Type of pre-treatment must be determined by preliminary tests.

Application

SikaForce®-436 L120 is processed by 2-component equipment or by dual cartridges with pneumatic or electric driven piston guns. For cartridges use the mixer as stated, with equipment the mixer needs to be defined by tests.

Prior to application, check both components for crystallisation. Never use components if crystalisation has occured.

Cartridge: Extrude adhesive without the static mixer to equalize the filling levels. Attach the static mixer and dispense of a bead of at least the length of the mixer prior to the application.

Adhesion as well as curing speed can be improved by heat.
For automated applications a suitable filter system has to be used.
For support on selecting and setting up a suitable pump system, contact the System Engineering department of Sika Industry.

 

Removal

SikaForce®-436 L120 may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent.
Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.
Do not use solvents on skin.

STORAGE CONDITIONS

All components of SikaForce®-436 L120 have to be stored at temperature between 15 °C and 25 °C in a dry place. Do not expose it to direct sunlight or frost. After opening of the packaging, the content has to be protected against humidity.
For transportation purposes the storage temperature can be exceeded for a maximum period of 2 weeks at temperatures between 0 °C and 40 °C being allowed.

Documents