Primer T-501

Polymeric. Containing solvents.

12 months from date of production

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

~0,87 g/cm³ (+20 °C)

Liquid

 +5 °C min

+5 °C min

Consumption depends on the roughness and absorbency of the substrate. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.Consumption depends on the roughness and absorbency of the substrate. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.

The substrate must be solvent resistant, clean, dry, free of grease, bitumen, oil, paint coatings and dust.

Use the appropriate preparation equipment to achieve the required substrate quality. If heavily contaminated or oiled, sheet metal decking must be cleaned with cleaner before applying the primer.

1-part ready to use and must not be thinned or mixed with other products. Before use, stir product thoroughly.

Application must be during dry weather at temperatures > +5 °C.

Apply a uniform, thin coat of Primer T-501 to the substrate by brush. Allow primer to dry tack free.

Absorbent substrates may require two coats. Allow sufficient overcoating time for 2- coats.

Clean all tools and application equipment with Sarna Cleaner /  Sarnafil® T Clean immediately after use. Hardened material can only be mechanically removed