Product Data Sheet Show all documents
Sikalastic® Rapid Aggregate

Sikalastic® Rapid Aggregate

Quartz Sand

Sikalastic® Rapid Aggregate is a naturally rounded, light coloured quartz.  It is used to provide a skid inhibiting surface.

  • Provides skid-inhibiting surface
Contact Us
Product Data Sheet Show all documents

Usage

  • Sand aggregate to be used in conjuntion with the Sikalastic® Rapid Trafficable systems
 

Advantages

  • Provides skid-inhibiting surface

Packaging

25kg Bags

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Tested in accordance with BS 7976:2002 + A1:2013
Product Information

Chemical Base

Natural sand 0.71-1.25mm

Shelf Life

Unlimited shelf life stored in the correct conditions.

Storage Conditions

Store in original packaging in a location away from sources of dampness and extremes of temperature. Keep protected from rain.

Application

Consumption

Yield

3.0 kg/m²
Application steps

APPLICATION

Apply the specified system as per datasheet

Whilst the material is still liquid/wet broadcast into the surface. Broadcast to excess (Approx 3kg/m2) so that none of the area looks wet but appears completely dry and covered with quartz. This may take a few minutes to sink down so make sure that the appearance remains uniform, top up any areas that grin through whilst the coating is wet. Broadcast the sand by throwing small amounts upwards so that the sand settles on the surface.


Please note: DO NOT THROW DIRECTLY DOWN AT THE COATING OR RIPPLING WILL OCCUR.


Leave the membrane to dry through (sufficiently dry enough to walk on without disturbing the aggregate when applying the top coat)
Once dry, brush off excess.

Complete with Sikalastic® Rapid Pigmented Sealer and sprinkle flake into the wet coating as appropriate.

Documents