SikaShield® Gully angled CR
SikaShield® Gully angled CR is a prefabricated rigid polyamide rainwater outlet used with bituminous roofing membranes.
- Resistant to UV exposure
- Product is supplied with an integrated welding tab
- Product is supplied including a high quality leafguard
Usage
The Product is used as a:- Rainwater outlet for use with bituminous roofing membranes
- The Product may only be used by experienced professionals.
- The use of the Product is limited to geographical locations with average monthly minimum temperatures of -50 °C. Permanent ambient temperature during use is limited to +50 °C.
Advantages
- Resistant to UV exposure
- Product is supplied with an integrated welding tab
- Product is supplied including a high quality leafguard
Packaging
Packed in transparent plastic bag.
Refer to the current price list for available packaging variations.
Colour
| Colour | orange / black |
Product Details
Chemical Base
Drain body and leaf guard | Polyamide (PA6) |
Welding tab | Polymer modified bitumen (SBS) |
Shelf Life
5 years from date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5°C and +30°C. Always refer to packaging.
Dimensions
| Type | Spigot outside Ø | Spigot nominal | Minimum installation height |
| Angled | 75 mm | DN 70 | 125 mm |
| Angled | 110 mm | DN 100 | 160 mm |
| Angled | 125 mm | DN 125 | 170 mm |
System Structure
The following products must be considered for use depending on roof design:
SikaShield® Gully add-on element
SikaSjhield® Gully overflow add-on element
SikaShield® bituminous roofing membranes
Compatibility
With all SikaShield® bituminous roofing membranes
Flow rate
In accordance to the depth of water.
25 mm | 35 mm | 45 mm | 55 mm | 65 mm |
3.5 L/s | 4.0 L/s | 4.3 L/s | 4.4 L/s | 4.6 L/s |
3.2 L/s | 5.4 L/s | 7.5 L/s | 9.0 L/s | 9.5 L/s |
3.2 L/s | 5.5 L/s | 7.5 L/s | 9.1 L/s | 9.6 L/s |
EN 1253: depth of water until Ø 110 mm: 35 mm, from Ø 125 mm: 45 mm
Application
Ambient Air Temperature
Maximum | +60°C |
Minimum | -20°C |
Substrate Temperature
Maximum | +60°C |
Minimum | -30°C |
APPLICATION
IMPORTANT
Strictly follow installation procedures
Strictly follow installation procedures as defined in Method Statements, application manuals and working instructions which must always be adjusted to the actual site conditions.
IMPORTANT
Application by trained personnel
The application of this Product must only be carried out by an applicator that is trained or approved by Sika. The applicator must also be experienced in this type of application.
IMPORTANT
Ventilation in confined spaces
Always ensure good ventilation when applying the Product in a confined space.
For application information refer to installation instructions: SikaShield® roof waterproofing membranes. The Product must be fastened securely to the roof parapet. The fasteners must be designed to resist the wind forces.
Application below +5 °C
Note: Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.
Note: Installation of ancillary products, such as contact adhesives or cleaners is limited to temperatures above +5 °C. Refer to relevant Product Data Sheets for further information.