Sarnafil® TG 76-15 Felt
Sarnafil® TG 76-15 Felt (thickness 1.5 mm) is a multi-layer, synthetic roof waterproofing sheet based on premium-quality flexible polyolefins (FPO),
containing stabilizers, with inlay of glass non-woven and Polyester fleece backing according to EN 13956.
Sarnafil® TG 76-15 Felt is a hot air weldable, UV-resistant roof membrane, designed to use in all global climatic conditions.
- Proven performance over decades
- Various colours available
- Resistant to permanent UV irradiation
- High dimensional stability due to glass fleece inlay
- Resistant to all common environmental influences
- Resistant to micro-organisms
- Compatible to old bitumen
- Hot air welding without use of open flames
- Recyclable
Usage
Roof waterproofing membrane for fully bonded exposed roofs with Sarnacol®-2142 S.Advantages
- Proven performance over decades
- Various colours available
- Resistant to permanent UV irradiation
- High dimensional stability due to glass fleece inlay
- Resistant to all common environmental influences
- Resistant to micro-organisms
- Compatible to old bitumen
- Hot air welding without use of open flames
- Recyclable
Packaging
Sarnafil® TG 76-15 Felt standard rolls are wrapped individually in a blue PE-foil.
Packing unit: | see price list |
Roll length: | 20.00 m |
Roll width: | 2.00 m |
Roll weight: | 74.00 kg |
Colour
Surface: | matt |
Colours: | |
Top surface: | beige grey (nearest RAL 7040) |
Bottom surface: | black |
Product Details
APPROVALS / STANDARDS
- Sarnafil® TG 76-15 Felt is designed and manufactured to meet the mostinternational recognised standards.
- Polymeric sheets for roof waterproofing according to EN 13956, certified by notified body 1213-CPD-3914 and provided with the CE marking.
- Reaction to fire according to EN 13501-1.
- External fire performance tested according to ENV 1187 and classified according to EN 13501-5: BROOF(t1).
- Official Quality Approvals and Agrement Certificates and approvals.
- Monitoring and assessment by approved laboratories.
- Quality Management system in accordance with EN ISO 9001/14001.
Shelf Life
Product does not expire if correctly stored.
Storage Conditions
Rolls must be stored in a horizontal position on pallet and protected from direct sunlight, rain and snow. Do not stack pallets of rolls during transport or storage.
Product Declaration
EN 13956
Visible Defects
Pass | (EN 1850-2) |
Length
20 m (-0 % / +5 %) | (EN 1848-2) |
Width
2 m (-0.5 % / +1 %) | (EN 1848-2) |
Effective Thickness
1.5 mm (-5 % / +10 %) | (EN 1849-2) |
Straightness
≤ 30 mm | (EN 1848-2) |
Flatness
≤ 10 mm | (EN 1848-2) |
Mass per unit area
1.85 kg/m² (-5 % / +10 %) | (EN 1849-2) |
System Structure
Wide range of accessories is available e.g. prefabricated parts, roof drains, scuppers and walkway pads.
The following materials shall be used:
Sarnafil® T 66-15 D Sheet for detailing
Sarnafil® T Metal Sheet
Sarnabar
Sarnafil® T Prep / Sarnafil® T Wet Task Set
Sarnacol® T 660
Solvent T 660
Sarnacol® 2142S
Sarnafil® T Clean
Compatibility
Sarnafil® TG 76-15 Felt may be installed on all thermal insulations and levelling layers suitable for roofing. No additional separation layer is required.
Sarnafil® TG 76-15 Felt is suitable for installation directly on top of existing, carefully cleaned, level bituminous roofing, e.g. re-roofing over old flat roofs.
Sarnacol®-2142 S single-component PUR adhesive is designed for adhering feltbacked Sarnafil® TG 76-15 Felt to standard insulations and substrates. Adhering Sarnafil® TG 76-15 Felt by means of Sarnacol®-2142 S is particularly suitable for reroofing over old bitumen waterproofing. (Not suitable for re-roofing over synthetic, rubber or ECB roofing).
Resistance to Impact
hard substrate | ≥ 800 mm |
soft substrate | ≥ 1500 mm |
Hail Resistance
rigid substrate | ≥ 25 m/s |
flexible substrate | ≥ 37 m/s |
Resistance to Static Load
soft substrate | ≥ 20 kg |
rigid substrate | ≥ 20 kg |
Tensile Strength
longitudinal (md)1) | ≥ 800 N/50 mm |
transversal (cmd)2) | ≥ 600 N/50 mm |
1) md = machine direction
2) cmd = cross machine direction
Elongation
longitudinal (md)1) | ≥ 50 % |
transversal (cmd)2) | ≥ 50 % |
1) md = machine direction
2) cmd = cross machine direction
Dimensional Stability
longitudinal (md)1) | ≤ |0.2| % |
transversal (cmd)2) | ≤ |0.1| % |
1) md = machine direction
2) cmd = cross machine direction
Joint Peel Resistance
≥ 300 N/50 mm | (EN 12316-2) |
Joint Shear Resistance
≥ 500 N/50 mm | (EN 12317-2) |
Foldability at Low Temperature
≤ -30 °C | (EN 495-5) |
External Fire Performance
BROOF(t1) < 20° | (EN 1187) (EN 13501-5) |
Reaction to Fire
Class E | (EN ISO 11925-2, classification to EN 13501-1) |
Effect of Liquid Chemicals, Including Water
On request | (EN 1847) |
Exposure to Bitumen
Pass3) | (EN 1548) |
3) Sarnafil® T is compatible to old bitumen
UV Exposure
Pass (> 5 000 h / grade 0) | (EN 1297) |
Water Tightness
Pass | (EN 1928) |
Application
Ambient Air Temperature
-20 °C min. / +60 °C max.
Substrate Temperature
-30 °C min. / +60 °C max.
SUBSTRATE QUALITY
The substrate surface must be uniform, smooth and free of any sharp protrusions or burrs, etc.
The supporting layer must be compatible to the membrane and free of oil and grease. Cut open any blisters in the old waterproofing and repair.
The safety of the existing roof assembly in terms of wind uplift must be ensured. Any insufficiently secured sections or components (e.g. chippings, slating etc.) must be removed to provide a smooth surface.
The curing of Sarnacol®-2142 S requires moisture. The base layer may therefore be slightly moist (no puddles). If the relative humidity is below 35 % moisten the adhesive after it has been applied.
APPLICATION
Installation works to be carried out only by Sika instructed contractors for roofing.
Installation of some ancillary products, e.g. contact adhesives / cleaners is limited to temperatures above +5 °C. Please observe information given by Product Data Sheets.
Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.