Product Data Sheet Show all documents
Sika ViscoFlow®-3000 (GB)

Sika ViscoFlow®-3000 (GB)

High range water reducing/superplasticising concrete admixture with fast adsorption characteristics

Sika ViscoFlow®-3000 (GB) is a liquid admixture for concrete based on unique polycarboxylate polymer technologies. Sika ViscoFlow®-3000 (GB) is designed as a high range water reducer or superplasticiser. It is particularly suited for use in concretes that require low water/cement ratios and / or high water reductions. The product provides fast adsorption resulting in highly efficient dispersion and potential reduction in mixing time.

High range water reductions resulting in higher strengths & densities
  • Improved mixing times
  • Improved cohesion properties
  • Improved early & ultimate strengths
  • Excellent placement characteristics
  • Improved rheology
  • Improved durability
  • Reduced segregation & bleeding
  • Reduced drying shrinkage
  • Reduced mix costs
Product Data Sheet Show all documents

Usage

Sika ViscoFlow®-3000 (GB) is a unique product that is suitable for the production of readymix concrete
  • Ideally suited for use in Self-Compacting Concrete (SCC) & flowing screeds
  • Suitable for use across a broad range of consistence classes from S3 - SF3
  • High-performance concrete
  • High-rise concrete
  • Slipform concrete
  • Improved effectiveness in higher ambient temperatures
 

Advantages

High range water reductions resulting in higher strengths & densities
  • Improved mixing times
  • Improved cohesion properties
  • Improved early & ultimate strengths
  • Excellent placement characteristics
  • Improved rheology
  • Improved durability
  • Reduced segregation & bleeding
  • Reduced drying shrinkage
  • Reduced mix costs

Packaging

1000lt IBC, 20lt container

Colour

Clear / straw

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to the requirements of BS EN 934-2 tables 3.1 & 3.2.

DoP 14836904, certified by Factory Production Control Body 1029 and provided with the CE mark
DoP 63769647, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information

Chemical Base

Modified polycarboxylate

Shelf Life

12 months from date of production if stored properly in undamaged containers.

Storage Conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect
from direct sunlight and frost.

Specific gravity

1.06kg/l (at +20°C)

pH-Value

4.5 (+/-1.0)

Total Chloride Ion Content

<0.1% w/w (chloride free)

Equivalent Sodium Oxide

<0.25% w/w (alkali content)
Technical Information

Specific Advice

Freezing Point: +1°C
Air Entrainment: Negligible, minimal increase
Effect on Setting: Extension to normal setting time
Effect of Overdosing: Increased workability and segregation

Application

Application Information

Compatibility

Sika ViscoFlow®-3000 (GB) may be combined with many other Sika
products.
Important: Always conduct trials before combining products in specific
mixes and contact our Technical Service Department for information and
advice about any specific combinations.

DISPENSING

Sika ViscoFlow®-3000 (GB) should be dispensed
through suitable calibrated dosing equipment.
Sika ViscoFlow®-3000 (GB) is added to the gauging water or added with it into the concrete mixer.
Consumption

Recommended Dosage

0.5 - 1.5% by weight of cement
Application steps

APPLICATION INSTRUCTIONS

Application Method / Tools

  • The standard rules of good concreting practice, concerning production and placing, are to be followed.
  • Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components.
  • Fresh concrete must be cured properly and curing applied as soon as possible.

 

Notes on Application / Limitations

When using Sika ViscoFlow®-3000 (GB) a suitable mix design has to be taken into account and local material sources shall be trialled.

  • Sika ViscoFlow®-3000 (GB) shall not be added to dry cement.
  • Excessive water addition or overdosing may cause bleeding or segregation.
  • Support from our Technical Service Department is recommended.
  • Frost: If frozen and / or if precipitation has occurred, Sika ViscoFlow®-3000 (GB) may be used after thawing slowly

Documents