Product Data Sheet Show all documents
Sika ViscoFlow®-3200

Sika ViscoFlow®-3200

High range water reducing/super plasticizing admixtures

Sika ViscoFlow®-3200 is a liquid admixture for concrete based on unique polycarboxylate polymers. Sika ViscoFlow®-3200 is designed as a high range water reducer or superplasticiser for concrete that requires excellent workability retention.

  • High range water reduction resulting in higher strengths and densities
  • Improved cohesion properties
  • Improved workability retention
  • Improved rheology
  • Improved durability
  • Reduced segregation and bleeding
Product Data Sheet Show all documents

Usage

  • Sika ViscoFlow®-3200 is suitable for the production of ready mixed concrete 
  • Ideally suited for use in self compacting and flowing concrete
  • Suitable for use in cementitious flowing screeds
  • Applicable across broad range of consistence classes from S3 – SF3
  • High performance concrete
  • High rise/pumped concrete
  • Provides extended workability retention
 

Advantages

  • High range water reduction resulting in higher strengths and densities
  • Improved cohesion properties
  • Improved workability retention
  • Improved rheology
  • Improved durability
  • Reduced segregation and bleeding

Packaging

20 L drum & 1000 L IBC

Colour

Brown liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to the requirements of BS EN 934-2 Table 3.1 and 3.2
DoC 35238578, certified by Factory Production Control Body 0120 and provided with the UKCA mark
DoP 79827279, certified by Factory Production Control Body 1029 and provided with the CE mark
Product Information

Shelf Life

12 months from date of production if stored properly in undamaged containers.

Storage Conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost.

Specific gravity

1.09 kg/L

Total Chloride Ion Content

<0.1 % w/w (chloride free)

Equivalent Sodium Oxide

<0.4 % w/w (Alkali content)

Application

Application Information

Dispensing

Sika ViscoFlow®-3200 should be dispensed through suitable calibrated dosing equipment.
Sika ViscoFlow®-3200 is added to the gauging water or added with it into the concrete mixer.

Compatibility

Sika ViscoFlow®-3200 may be combined with many other Sika products.

Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information and advice about any specific combinations.
Consumption

Recommended Dosage

0.3-1.2 % by weight of cement

 
Application steps

MIXING

Sika ViscoFlow®-3200 should not be added to dry cement

APPLICATION

The standard rules of good concreting practice, concerning production and placing, are to be followed.
Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components.
Fresh concrete must be cured properly and curing applied as soon as possible.

Documents