Product Data Sheet Show all documents
SikaPlast®-100 MR (GB)

SikaPlast®-100 MR (GB)

Mid-Range Water Reducing/Plasticising Concrete Admixture

SikaPlast®-100 MR (GB) is a liquid admixture for concrete which is used as a mid-range water reducer/plasticiser. It meets the requirement of BS EN 934 -2.

  • Mid-range water reductions resulting in higher strengths and densities
  • Flexible application as both WRA and HRWR
  • Less sensitive to variations in cement and aggregate types
  • Improved cohesion properties
  • Improved early and ultimate strengths
  • Improved rheology
  • Improved durability
  • Reduced segregation and bleeding
  • Reduced drying shrinkage
  • Reduced mix costs
* Compared to concrete without admixture
Contact Us
Product Data Sheet Show all documents

Usage

  • SikaPlast®-100 MR (GB) is a unique product that is suitable for the production of ready mixed concrete
  • Applications that require high quality concrete
  • Applications that require improved consistence retention
  • Utilisation of crushed rock fines in concrete
  • Highly efficient concrete
 

Advantages

  • Mid-range water reductions resulting in higher strengths and densities
  • Flexible application as both WRA and HRWR
  • Less sensitive to variations in cement and aggregate types
  • Improved cohesion properties
  • Improved early and ultimate strengths
  • Improved rheology
  • Improved durability
  • Reduced segregation and bleeding
  • Reduced drying shrinkage
  • Reduced mix costs
* Compared to concrete without admixture

Packaging

20 litre drum, 1000 litre IBC

Colour

Brown liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to the requirements of BS EN 934-2 Tables 3.1 & 3.2

DoP 73352079, certified by Factory Production Control Body 1029 and provided with the CE mark

DoP 14238241, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information

Chemical Base

Modified polycarboxylate blend

Shelf Life

12 months from date of production if stored properly in undamaged containers.

Storage Conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost.

Specific gravity

1.1 kg/l (at +20°C)

pH-Value

1.1 (+/-1.0)

Total Chloride Ion Content

<0.1%
Technical Information

Specific Advice

Alkali Content:  <0.25%

Freezing Point:  +1°C

Air Entrainment:  Negligible

Effect on Setting:  Slight extension to normal setting

Effect of Overdosing:  Increased workability and segregation

Application

Application Information

Compatibility

Sika Admixtures:

  • Compatibility information available on request

Cements:

  • All cement combination

Dispensing

SikaPlast®-100 MR (GB) should be dispensed through suitable calibrated dosing equipment.
Consumption

Recommended Dosage

0.3 – 1.2 % by weight of cement
Application steps

APPLICATION INSTRUCTIONS

Application Method / Tools
 

  • The standard rules of good concreting practice, concerning production as well as placing, are to be followed. Refer to relevant standards. Fresh concrete must be cured properly.
  • SikaPlast® 100 MR should not be added to dry cement
  • SikaPlast® 100 MR should be added with the mixing water


Notes on Application / Limitations
 

  • When using SikaPlast®-100 MR (GB) a suitable mix design is required and local material sources should be evaluated.

Documents