Macro Fibres
Macro Fibres - Polypropylene
| Polypropylene | Average Dosage per M3 | Material | Application |
|---|---|---|---|
| SikaFiber® Force-50 SikaFiber® Force-50 are 50 mm polyolefin macro fibres designed to enhance structural concrete by reducing the need for steel reinforcement and improving durability. Suitable for a wide range of applications—including slabs, foundations, precast elements, and marine structures—they improve crack resistance, flexural and shear strength, abrasion resistance, and freeze-thaw durability. Packaged in soluble bags for easy dosing, they offer better cohesion in fresh concrete and simplify construction by eliminating the need for steel cutting and tying. Certified to EN 14889-2 standards, they also outperform steel fibres by avoiding corrosion and offering greater displacement capacity. | 4 - 6 KG | Polypropylene | Structral Fibre |
| SikaFiber®-50 HPP SikaFiber®-50 HPP is a high-performance macro-synthetic fibre designed to reinforce concrete and cementitious mixes, enhancing durability even after cracking. Its contoured profile ensures strong anchorage within the concrete, improving flexural toughness, impact resistance, and cohesion while reducing segregation. Corrosion-resistant and easy to handle, it offers a cost-effective, non-metallic alternative to steel mesh and fibres for applications like slabs, pavements, precast elements, and sea defences. It meets EN 14889-2:2006 standards and carries both CE and UKCA certifications. | 4 - 6 KG | Polypropylene | Structral Fibre |
| SikaFiber®-T-60 SikaFiber® T-60 is a synthetic macro fiber made from polyolefin, designed to improve and reinforce concrete or sprayed concrete in applications such as tunneling, slope stabilization, industrial floors, foundations, walls, and precast elements. It enhances hardened concrete properties by increasing ductility, impact resistance, post-crack behavior, and energy absorption, while offering advantages like no minimum cover requirements, good pumpability, chemical resistance, and reduced equipment wear compared to steel fibers. Supplied in 5 kg or 10 kg bags, it has an unlimited shelf life when stored properly, and is typically dosed at 3–10 kg/m³. The product conforms to EN 14889-2 standards and is suitable for both wet and dry sprayed concrete. | 3 - 10 KG | Polypropylene | Structral Fibre |
Macro Fibres - Steel
| Steel | Average Dosage per M3 | Material | Application |
|---|---|---|---|
| Novocon® FE-1050 Novocon® FE-1050 is a high-performance steel fibre reinforcement designed for concrete, mortars, and cementitious mixes. Made from cold-drawn wire with flat ends, it complies with EN 14889-1:2006 standards and enhances concrete by improving crack resistance, ductility, impact resistance, and load-bearing capacity. Suitable for a wide range of applications including slabs, metal decking, precast elements, pavements, and blast-resistant structures, it offers efficient, economical, and safer reinforcement with reduced labour and construction time. | 25 - 35 KG | Steel | Metal Decking |
| SikaFiber® Novocon® HE-1050 HT SikaFiber® Novocon® HE-1050 HT is a high-strength steel fibre for reinforcing concrete, offering improved crack resistance, durability, and load capacity. It’s easy to use, reduces labour, and suits a wide range of applications including slabs, floors, pavements, and precast elements. Fully compliant with EN and ASTM standards. | 25 - 35 KG | Steel | Structral Fibre |
| SikaFiber® Novocon® HE-1060-HT SikaFiber® Novocon® HE1060-HT is a high-performance steel fibre designed to reinforce concrete and other cementitious mixes. Made from cold-drawn wire with hooked ends, it enhances crack resistance, ductility, impact strength, and load-bearing capacity while reducing labour and material requirements. Suitable for a wide range of applications including slabs, floors, pavements, precast elements, and blast-resistant structures, it conforms to BS EN 14889-1:2006 standards and is CE marked for quality assurance. | 25 - 35 KG | Steel | Structral Fibre |
Micro Fibres
Micro Fibres - Polypropylene
| Polypropylene | Average Dosage per M3 | Material | Application |
|---|---|---|---|
| Sika® Fibermesh®-150 Sika® Fibermesh®-150 is a 100% virgin polypropylene monofilament fibre system designed to control plastic shrinkage and settlement cracking in concrete. Manufactured in an ISO 9001 certified facility, it forms a multidimensional fibre network that supports aggregate distribution and promotes uniform bleeding without affecting curing or absorbing water. Ideal for ground-supported slabs, precast elements, overlays, shotcrete, bridge decks, and residential applications like driveways and pavements, it offers reliable crack control across a wide range of concrete uses. | 1 Bag | Polypropylene | Crack control & flowing screeds |
| Sika® Fibermesh®-150F Sika® Fibermesh®-150F is a micro reinforcement system made from 100% virgin polypropylene monofilament fibres, designed to enhance concrete performance by reducing fire-induced spalling, intrinsic cracking, and improving water tightness. Manufactured in an ISO 9001 certified facility, it is ideal for use in tunnels, high-rise buildings, bridges, precast elements, and shotcrete. The fibres improve cohesion, reduce segregation, settlement, and bleeding, ultimately increasing the durability and integrity of concrete structures. | 2 KG | Polypropylene | Fire protection & crack control |
| Sika® Fibermesh®-150ML - 0.9kg bags Sika® Fibermesh®-150ML is a micro reinforcement system made from 100% virgin polypropylene monofilament fibres, designed to enhance concrete performance by reducing fire-induced spalling, intrinsic cracking, and improving water tightness. Manufactured in an ISO 9001 certified facility, it is ideal for use in tunnels, high-rise buildings, bridges, precast elements, and shotcrete. The fibres improve cohesion, reduce segregation, settlement, and bleeding, ultimately increasing the durability and integrity of concrete structures. | 1 Bag | Polypropylene | Metal Decking |
| Sika® Fibercast®-500 Sika® Fibercast®-500 is a high-performance, 100% virgin polypropylene micro-reinforcement fibre system designed to enhance concrete durability. Manufactured in an ISO 9001 facility, it improves cohesion, reduces cracking, and resists abrasion, freeze/thaw damage, and water migration. Ideal for precast, shotcrete, tanks, walls, and marine or agricultural applications, it complies with EN 14889-2:2006 and ASTM C1116 standards, offering a reliable, non-absorptive solution for demanding concrete environments. | 1 Bag | Polypropylene | Crack control & flowing screeds |
Micro Fibres - Cellulose
| Cellulose | Average Dosage per M3 | Material | Application |
|---|---|---|---|
| SikaFiber®-200 SikaFiber®-200 is a 100% natural, biodegradable cellulose microfibre designed to reduce drying and plastic shrinkage cracking in non-structural concrete, screeds, and mortars. It serves as an eco-friendly alternative to polypropylene fibres and can replace traditional wire mesh for shrinkage control. The extremely fine fibres disperse easily during mixing, forming a dense network that helps distribute stresses in curing concrete. Ideal for use in slabs, floors, screeds, pavements, decorative concrete, and mortars, SikaFiber®-200 enhances durability while being safe for the environment. | 1 Bag | Cellulose | Crack control & flowing screeds |
