Product Data Sheet Safety Data Sheet Show all documents
Sikament®-160

Sikament®-160

Water reducing/plasticising admixture

Sikament®-160 is a liquid admixture that is a formulated combination of modified lignosulphonates and naphthalene condensate.

  • Water reduction, resulting in higher density, higher strength and reduced permeability
  • Reduced shrinkage during curing
  • Reduction / replacement of cement
  • More economic mix design
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sikament®-160 produces a more uniformly cohesive concrete to meet the specifications and needs of Architects, Consulting Engineers and Contractors.
Sikament®-160 is used in wide range of applications and concrete systems.  

Advantages

  • Water reduction, resulting in higher density, higher strength and reduced permeability
  • Reduced shrinkage during curing
  • Reduction / replacement of cement
  • More economic mix design

Packaging

1000 L IBC

Colour

Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to the requirements of BS EN 934-2 Table 2
DoP 94867427, certified by Factory Production Control Body 0120 and provided with the UKCA mark
Product Information

Chemical Base

Modified lignosulphonates and naphthalene condensate

Shelf Life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Storage Conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost.

Specific gravity

1.17 kg/L

Total Chloride Ion Content

<0.1 % w/w (chloride free)

Equivalent Sodium Oxide

<0.65 % w/w (alkali content)

Application

Application Information

Dispensing

  • Sikament® 160 is added to the gauging water or added with it into the concrete mixer.
  • To take advantage of the optimum water reduction, a wet mixing time, which is depending on the mixing conditions and mixer performance, of at least 60 seconds is recommended.
  • To avoid excess water in the concrete, the final dosage must begin only after 2/3 of the wet mixing time.

Compatibility

Sikament®-160 may be combined with many other Sika products.
Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information and advice about any specific combinations.
Consumption

Recommended Dosage

0.3 – 1.0% by weight of cement
Application steps

APPLICATION INSTRUCTIONS

APPLICATION METHOD / TOOLS
 

  • The standard rules of good concreting practice, concerning production and placing, are to be followed.
  • Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components.
  • Fresh concrete must be cured properly and curing applied as early as possible.
     

CLEANING OF TOOLS
 

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.
 

NOTES ON APPLICATION / LIMITATIONS
 

  • When using Sikament®-160 a suitable mix design has to be taken into account and local material sources shall be trialled.
  • Sikament®-160 shall not be added to dry cement.
  • Excessive water addition or overdosing may cause bleeding or segregation.
  • Support from our Technical Service Department is recommended
  • Frost: If frozen and / or if precipitation has occurred, Sikament®-160 may be used after thawing slowly at room temperature followed by intensive remixing.
 

Documents