Product Data Sheet Safety Data Sheet Show all documents

Sikafloor®-02 Primer

Acrylate Flooring Primer for Levelling Compounds And Tile Adhesives

Sikafloor®-02 Primer is a 1-part, acrylate resin for priming non-absorbent substrates before applying cementitious levelling compounds and tile adhesives.

  • 1-part
  • Provides optimum adhesion on non-absorbent substrates
  • Low consumption / high coverage
  • Suitable for use with underfloor heating
  • Short waiting times
  • Very low emissions
  • Easy to apply by roller
  • Ready for use
  • Solvent-free according to TRGS 610
Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

As a primer for:
  • Improving adhesion on smooth and sound non-absorbent substrates
  • Interior use only
 

    Advantages

    • 1-part
    • Provides optimum adhesion on non-absorbent substrates
    • Low consumption / high coverage
    • Suitable for use with underfloor heating
    • Short waiting times
    • Very low emissions
    • Easy to apply by roller
    • Ready for use
    • Solvent-free according to TRGS 610

    Packaging

    5 and 12 kg containers

    Refer to current price list for packaging variations

    Colour

    Blue liquid

    Product Details

    Sustainability / Certifications / Approvals

    ENVIRONMENTAL INFORMATION

    • IBU Environmental Product Declaration (EPD)
    • VOC emission classification GEV-Emicode EC1PLUS, license number 6159/24.02.97
    Product Information

    Chemical Base

    Special acrylate dispersion with additives.

    Shelf Life

    12 months from date of production

    Storage Conditions

    The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

    Density

    1.3 kg/l

     

    Application

    Application Information

    Substrates

    Non-absorbent substrate compatibility:

    • Concrete
    • Cementitious screeds
    • Substrates with existing water-resistant adhesive residue
    • Ceramic tiles
    • Natural stones
    • Terrazzo (epoxy or cementitious)
    • Mineral based magnesia screeds
    • Metals
    • Epoxy and water-based polyurethane surfaces
    • Fully bonded resilient floorings (except polyolefin coverings)
    • Mastic asphalt screeds IC 10 and IC 15 according to EN 13 813
    • Other substrate types contact Sika Technical Services

    Ambient Air Temperature

    +5 °C min. / +30 °C max.

    Substrate Temperature

    +5 °C min. /  +30 °C max.

    Waiting Time / Overcoating

    Levelling compounds and tile adhesives on Sikafloor®-02 Primer:

    SubstrateWaiting Time

    Non-absorbent substrates as mentioned in substrate section excluding mineral based magnesia screeds

    ~1.5 hours

    Mineral based magnesia screeds~4 hours

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

    Reference must be made to the individual Product Data Sheets of the levelling compounds and tile adhesives.
    Consumption

    Consumption

    ~125 g/m2

    This figure is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
    Application steps

    MIXING

    Ready to use, Stir before use.

    APPLICATION

    Strictly follow installation procedures as defined in method statements, application manuals and working instructions which must always be adjusted to the actual site conditions.

    Apply primer onto the prepared substrate by short-pile roller or pad applicator. Ensure a continuous, pore free coat covers the substrate. Avoid the formation of puddles.

    Confirm waiting /overcoating time has been achieved before applying subsequent products.

    CLEANING OF TOOLS

    Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically

    Documents