Moisture barriers are an essential component in the construction industry to protect floors from moisture damage. At Sika, we understand the importance of protecting your floors from moisture damage, which is why we offer a range of moisture barrier solutions.Our moisture barriers are designed to reduce the transmission of moisture from the subfloor and provide a strong, durable base for subsequent flooring systems.
Our moisture barrier solutions are ideal for use in new construction or renovation projects and can be used in areas with high moisture, such as food and beverage processing facilities, commercial kitchens, and restrooms. By using Sika moisture barrier solutions, you can ensure that your flooring systems will be protected from the damaging effects of moisture.
In new construction the delay before fresh concrete slabs can be coated and allow the building works to continue, or the area to be put into service is a major problem. In refurbishment projects waiting for existing concrete moisture content to reduce to an acceptable level for over coating with impermeable resin coatings is also a big problem. Sika® EpoCem® Technology is an innovative solution that can be used to reduce all of this waiting time dramatically.
Want to find out more about Sika® EpoCem®?
Suitable for a concrete substrate which doesn’t have yet ideal condition for application. The floor finishes are usually done under time pressure. If you have to wait until the ideal conditions (pull-off strength 1.5 N/mm2) and humidity (<4 % pbv) in the concrete slab are achieved, then most flooring materials require a waiting time of at least 28 days, according to their data sheets and the respective standards. You can cut this waiting time significantly by using the unique intermediate layers Sikafloor®-81 or -82 EpoCem®. These can be applied directly onto the new concrete after just 7 to 10 days and also directly on concrete substrates recently prepared by high pressure water-jetting, in refurbishment works for example. The benefit is substantial.
Suitable for a concrete substrate which doesn’t have yet ideal condition for application. The floor finishes are usually done under time pressure. If you have to wait until the ideal conditions (pull-off strength 1.5 N/mm2) and humidity (<4 % pbv) in the concrete slab are achieved, then most flooring materials require a waiting time of at least 28 days, according to their data sheets and the respective standards.
