Sikafloor® MultiDur EB-42
Sikafloor® MultiDur EB-42 is a slip-resistant, coloured epoxy flooring system with very good chemical resistance.
- Good resistance to abrasion
- Very good resistance to specific chemicals
- Good mechanical resistance
System Structure
Usage
Sikafloor® MultiDur EB-42 is used in industrial buildings such as:- Automotive facilities
- Chemical and processing facilities
- Food and beverage facilities
Advantages
- Good resistance to abrasion
- Very good resistance to specific chemicals
- Good mechanical resistance
Colour
Available in various colour shades.
Appearance
Slip-resistant, gloss finish
System Details
APPROVALS / STANDARDS
Fire classification report EN 13501-1
System Structure
Sikafloor® MultiDur EB-42
| Layer | Product |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590, or |
| Wearing layer | Sikafloor®-392 |
| Broadcast in excess | Quartz sand (0.3–0.8 mm), or Quartz sand (0.6–1.2 mm) |
| Top coat | Sikafloor®-392 |
Contact Sika technical service for information on choosing the right primer for your project.
Composition
Epoxy
Nominal thickness
2 mm to 3 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
Refer to the individual Product Data Sheet for specific information on waiting time to overcoating the primers.
Before applying Sikafloor®-392 on Sikafloor®-392 allow:
Temperature | Minimum | Maximum |
+10 °C | 48 hours | 72 hours |
+20 °C | 30 hours | 48 hours |
+30 °C | 20 hours | 30 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 48 hours | 6 days | 10 days |
+20 °C | 30 hours | 4 days | 7 days |
+30 °C | 20 hours | 3 days | 5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 | 1–2 × 0.3–0.5 kg/m² |
| Wearing layer | Sikafloor®-392 | 1.6 kg/m² resin |
| Broadcast to excess | Quartz sand (0.3–0.8 mm), or Quartz sand (0.6–1.2 mm) | ~ 5 kg/m² |
| Top coat | Sikafloor®-392 | 1 × 0.75–0.85 kg/m² |
Contact Sika technical service for information on choosing the right primer for your project.
Note: Consumption data is theoretical and does not account for any additional material due to surface porosity, surface profile, variations in level, wastage, or other factors. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.