Sikafloor® MultiDur ES-40
Sikafloor® MultiDur ES-40 is a smooth, coloured, tough-elastic flooring coating system based on epoxy resins with very good chemical resistance.
- Very good resistance to specific chemicals
- Good mechanical resistance
- Good crack-bridging ability
- Impermeable to liquids
System Structure
Usage
Sikafloor® MultiDur ES-40 is used in industrial buildings such as:- Automotive facilities
- Chemical and processing facilities
- Bunding areas
- Food and beverage facilities
Advantages
- Very good resistance to specific chemicals
- Good mechanical resistance
- Good crack-bridging ability
- Impermeable to liquids
Colour
Available in various colour shades.
Appearance
Smooth, gloss finish
System Details
System Structure
Sikafloor® MultiDur ES-40
| Layer | Product |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Wearing layer | Sikafloor®-392 |
Contact Sika technical service for information on choosing the right primer for your project.
Composition
Epoxy
Nominal thickness
1.5 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
Refer to the individual Product Data Sheet for specific information on waiting time to overcoating the primers.
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 48 hours | 6 days | 10 days |
+20 °C | 30 hours | 4 days | 7 days |
+30 °C | 20 hours | 3 days | 5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | Consumption |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 | 1–2 × 0.3–0.5 kg/m² |
| Wearing layer | Sikafloor®-392 | 2.5 kg/m² |
Contact Sika technical service for information on choosing the right primer for your project.
Note: Consumption data is theoretical and does not account for any additional material due to surface porosity, surface profile, variations in level, wastage, or other factors. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.