Sikafloor® MultiDur WS-28
Smooth, water-based epoxy flooring system with low VOC emissions
Sikafloor® MultiDur WS-28 is a smooth, water-dispersed, coloured epoxy flooring system. It has low VOC emissions.
- Suitable for floors with normal to medium-heavy mechanical and chemical loading
- Low VOC emissions
- Good resistance to chemicals
- Good mechanical resistance
- Good water vapour permeability
- Dilutable by water
- Low odour
- Easy application
Usage
Sikafloor® MultiDur WS-28 is used for:- Manufacturing facilities and workshops
- Logistics facilities and warehouses
- Parking garages
- The System may only be used for interior applications.
- The System may only be used by experienced professionals.
Advantages
- Suitable for floors with normal to medium-heavy mechanical and chemical loading
- Low VOC emissions
- Good resistance to chemicals
- Good mechanical resistance
- Good water vapour permeability
- Dilutable by water
- Low odour
- Easy application
Colour
Cured system colour | Available in various colour shades |
Appearance
Smooth, matt or gloss finish depending on the optional top coat
System Details
APPROVALS / STANDARDS
-
Reaction to fire EN 13501-1:2018, Sikafloor® MultiDur WS-28, GHENT, Test report No. CR 23-0399-01.
System Structure
Sikafloor® MultiDur WS-28
| Product | Layer | |
| 1. | Primer | Sikafloor®-2510 W + 10 % water by weight |
| 2. | Wearing Layer | Sikafloor®-2510 W filled 1 : 1 with quartz sand (0.1 – 0.3 mm) |
| 3. | Top Coat | (Optional) Sikafloor®-2510 W |
Composition
Water-based epoxy
Nominal thickness
2.0 mm to 3.0 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 75 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
Before applying Sikafloor®-2510 W on Sikafloor®-2510 W, allow:
| Substrate Temperature | Minimum | Maximum |
| +10 °C | 48 hours | 7 days |
| +20 °C | 20 hours | 6 days |
| +30 °C | 10 hours | 3 days |
If relative air humidity is ≥ 75 %, the waiting time is increased by at least 24 hours.
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot Traffic | Light Traffic | Full Cure |
| +10 °C | 48 hours | 5 days | 10 days |
| +20 °C | 20 hours | 3 days | 7 days |
| +30 °C | 10 hours | 2 days | 5 days |
Note: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | Consumption |
| Primer | 1 × Sikafloor®-2510 W + 10 % by weight water | 0.15 – 0.2 kg/m² |
| Wearing Layer | Sikafloor®-2510 W filled 1 : 1 with quartz sand 0.1 – 0.3 mm | 3.8 kg/m² |
| Top Coat | (Optional) Sikafloor®-2510 W | 0.1 – 0.15 kg/m² |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.