Sikafloor® MultiFlex PB-36
Sikafloor® MultiFlex PB-36 is a slip-resistant, tough-elastic polyurethane flooring system. It provides a hard wearing finish with improved blush resistance.
- Improved blush resistance
- Good mechanical resistance
- Good resistance to specific chemicals
- Good resistance to abrasion
- Seamless
- Low maintenance
System Structure
Usage
Sikafloor® MultiFlex PB-36 is used in industrial buildings such as:- Car park decks
- Automotive facilities
- Logistics facilities and warehouses
- The System may only be used by experienced professionals.
- The System may only be used for interior applications.
Advantages
- Improved blush resistance
- Good mechanical resistance
- Good resistance to specific chemicals
- Good resistance to abrasion
- Seamless
- Low maintenance
Colour
Available in various colour shades.
Appearance
Slip-resistant, glossy finish
System Details
APPROVALS / STANDARDS
-
Reaction to Fire EN 13501-1, Sikafloor® MultiFlex PB-36, GHENT, Test Report No. CR 24-0149-01
System Structure
| Layer | Product |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Wearing layer | Sikafloor® BC 375 N filled 1:0.3 with Quartz Sand (0.1–0.3 mm) |
| Broadcast | Broadcast in excess with Quartz sand (0.3–0.8 mm) |
| Top coat | Sikafloor®-2640 |
Contact Sika Technical Service for information on choosing the right primer for your project.
Composition
Epoxy and polyurethane
Nominal thickness
2 mm
Tensile adhesion strength
> 1.5 N/mm² | (EN 1542) |
Reaction to Fire
| Class Bfl-s1 | (EN 13501-1) |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor® BC 375 N on the primer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 4 days |
+20 °C | 9 hours | 2 days |
+30 °C | 7 hours | 1 day |
Before applying a top coat on the broadcast Sikafloor® BC 375 N allow:
Temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | 15 hours | 18 hours | 24 hours |
| +20 °C | 6 hours | 11 hours | 14 hours |
| +30 °C | 3 hours | 9 hours | 12 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | Consumption |
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 | 0.3–0.5 kg/m² |
| Wearing layer | Sikafloor® BC 375 N filled 1:0.3 with Quartz sand (0.1–0.3 mm) | 1 × 1.0 kg/m² filled resin |
| Broadcast | Broadcast with Quartz sand (0.3–0.8 mm) | 1.5 kg/m² broadcast |
| Top coat | Sikafloor®-2640 | 0.7 kg/m² |
Note: Consumption data is theoretical and does not account for additional material due to surface porosity, surface profile, variations in level, wastage, or other factors. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.