Product Data Sheet Show all documents

Sikafloor® MultiFlex PB-37 UV

UV-resistant, Slip-resistant, Tough-elastic Polyurethane Flooring System 

Sikafloor® MultiFlex PB-37 UV is a UV-resistant, slip-resistant, tough-elastic polyurethane Flooring System. It is part of the Sikafloor® MultiFlex Flooring Range.

  • Good resistance to UV exposure
  • Good mechanical resistance
  • Good resistance to specific chemicals
  • Good resistance to abrasion
  • Seamless
  • Low VOC content
  • Low maintenance
Contact Us
Product Data Sheet Show all documents

Usage

The System is used in industrial buildings such as:         
  • Automotive facilities
  • Logistics facilities and warehouses
  • Car park decks
            Please note: The System may only be used for exterior applications.  

Advantages

  • Good resistance to UV exposure
  • Good mechanical resistance
  • Good resistance to specific chemicals
  • Good resistance to abrasion
  • Seamless
  • Low VOC content
  • Low maintenance

Colour

Available in various colour shades.

Appearance

Slip resistant, matt finish

System Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Fire Classification Report EN 13501-1.
System information

System Structure

Layer

Product

1. Primer

Sikafloor®-150

Sikafloor®-151

Sikafloor®-1590

2. Wearing Layer

Sikafloor® BC 375 N filled 1 : 0.3 with Quartz sand (0.1–0.3 mm) by weight

Broadcast to excess with Quartz sand (0.3–0.8 mm)

3. Seal Coat

Sikafloor®-359 N

Contact Sika® Technical Service for information on choosing the suitable primer for your project.

 

Composition

Polyurethane

Nominal thickness

~2.0 mm
Technical Information

Tensile adhesion strength

≥ 1.5 MPa

(EN 1542)

Application

Application Information

Ambient Air Temperature

Maximum

+30 °C

Minimum

+10 °C

Relative Air Humidity

Maximum

80 % r.h.

Dew Point

Refer to the individual Product Data Sheet.

Substrate Temperature

Maximum

+30 °C

Minimum

+10 °C

Substrate Moisture Content

Refer to the individual Product Data Sheet.

 

Waiting Time / Overcoating

When using Sikafloor®-1590, refer to the individual Product Data Sheet for specific information on waiting time to overcoating.

Before applying Sikafloor® BC 375 N over the primer, allow:

Temperature

Minimum

Maximum

+10 °C

17 hours

4 days

+20 °C

9 hours

2 days

+30 °C

7 hours

1 day

Before applying Sikafloor®-359 N on Sikafloor® BC 375 N allow:

Temperature

Minimum

Maximum

+10 °C

24 hours 

3 days

+20 °C

12 hours 

48 hours

+30 °C

8 hours 

36 hours

NOTE: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.

Applied Product Ready for Use

Temperature

Foot Traffic

Light Traffic

Full Cure

+10 °C

72 hours

6 days

10 days

+20 °C

24 hours

4 days

7 days

+30 °C

18 hours

2 days

5 days

NOTE: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Application consumption

Consumption

Layer

Product

Consumption

Primer

Sikafloor®-150

Sikafloor®-151

Sikafloor®-1590

1 to 2 × 0.3–0.5 kg/m²

Levelling

(if required)

Sikafloor®-150

Sikafloor®-151

Sikafloor®-1590

Refer to the individual Product Data Sheet.

Wearing Layer

Sikafloor® BC 375 N filled 1 : 0.3 with Quartz sand (0.1–0.3 mm) by weight
-
Broadcast to excess with Quartz sand (0.3–0.8 mm)

1 × 1.0 kg/m²

-
1.5 kg/m²

Seal Coat

Sikafloor®-359 N

1 × 0.7–0.9 kg/m²

NOTE: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.

Documents